Nike VR Pro Cavity Irons Specifications
Full factory loft, lie and length chart for the Nike VR Pro Cavity irons, 2011–2013.
- Years produced
- 2011–2013
- Category
- Players Irons
- Construction
- multi-piece cast cavity back
- Material
- 17-4 stainless steel; AM355 steel faces in the long irons
- Set makeup
- 3–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 19 | 59 | 39 | 0.2 | 2 |
| 4 | 22 | 59 | 38.5 | 0.195 | 3 |
| 5 | 25 | 60 | 38 | 0.19 | 4 |
| 6 | 28 | 61 | 37.5 | 0.17 | 5 |
| 7 | 32 | 62 | 37 | 0.15 | 6 |
| 8 | 36 | 62.5 | 36.5 | 0.12 | 7 |
| 9 | 40 | 63 | 36 | 0.11 | 8 |
| PW | 45 | 63.5 | 35.75 | 0.11 | 9 |
| AW | 50 | 64 | 35.75 | 0.11 | 10 |
| SW | 55 | 65 | 35.5 | 0.09 | 12 |
| LW | 60 | 65 | 35.25 | 0.09 | 8 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Nike VR Pro Cavity
The VR Pro Cavity was the most forgiving member of Nike's 2011 VR Pro family, sitting below the VR Pro Combo and VR Pro Blade. It uses Nike's Opti-Mass progressive construction: three-piece long irons with high-strength AM355 faces and added rear weight, two-piece mid irons, and one-piece 17-4 stainless short irons for feel, so the centre of gravity moves through the set. Lofts are a degree or two stronger than the Combo, with a 32-degree 7-iron and a 45-degree pitching wedge. The core set is 4-iron through pitching wedge with wedges through a 60-degree lob wedge available to match; figures below are the standard men's steel specification.
Stock shafts
- True Temper Dynalite 110 — steel
- Project X graphite — graphite
Related models
- Sibling: Nike VR Pro Combo
- Sibling: Nike VR Pro Blade
- Compare: Nike VR Pro Cavity vs Nike VR Pro Combo
- Compare: Nike VR Pro Cavity vs Nike VR Pro Blade
- Compare: Nike VR Pro Cavity vs Nike VR_S Forged
Frequently asked questions
What is the loft of a Nike VR Pro Cavity 7-iron?
The Nike VR Pro Cavity 7-iron has a loft of 32 degrees, with a 62-degree lie and a 37-inch steel-shaft length.
How do the VR Pro Cavity lofts compare to the VR Pro Combo?
They are one to two degrees stronger club for club: the Cavity's 7-iron is 32 degrees against the Combo's 35, and its pitching wedge 45 degrees against the Combo's 47.
Are the Nike VR Pro Cavity irons forged?
No. The heads are cast - one-piece 17-4 stainless steel in the short irons, with two-piece mid irons and three-piece long irons that add high-strength AM355 steel faces and rear weighting.
Finding a used set
The Nike VR Pro Cavity ran from 2011 to 2013 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- InTheHoleGolf 'Nike VR Pro Cavity Iron Set' specification table (retrieved July 2026) - supplied loft, lie, length, offset and bounce for 3-iron through LW, plus the True Temper Dynalite 110 steel and Project X graphite stock shafts. Retailer-published table, not a Nike sheet.
- qsponge.com VR Pro Cavity table lists the same lofts and lies (its 8-iron '33 degrees' row is an obvious typo for 36), corroborating the ladder.
- Golf Monthly 'Nike VR Pro Cavity irons' review (February 2011) - the 2011 release, 4-PW core set, Dynalite 110 stock shaft and the Opti-Mass three/two/one-piece progressive construction. The Hackers Paradise review confirms the 17-4 stainless body and AM355 long-iron faces.
Last reviewed 2026-07-29. Spot an error? [email protected]