Ping G20 Irons Specifications

Full factory loft, lie and length chart for the Ping G20 irons, 2011–2013.

Years produced
2011–2013
Category
Game Improvement Irons
Construction
investment cast
Material
17-4 stainless steel with a Custom Tuning Port
Set makeup
3–LW

Loft, lie & length chart

Standard men's steel-shaft specifications for the Ping G20 irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
32059.2538.750.32D0
4236038.250.3D0
52660.7537.750.28D0
62961.537.250.26D0
73262.2536.750.24D0
8366336.250.22D0
94063.7535.750.2D0
PW456435.50.18D2
UW506435.50.15D2
SW5464.2535.250.13D4
LW5864.5350.1D6

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop Ping G20

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

Ping G20 loft by clubColumn chart of loft in degrees for each club in the set: 3 20, 4 23, 5 26, 6 29, 7 32, 8 36, 9 40, PW 45, UW 50, SW 54, LW 58.0°10°20°30°40°50°60°3: 20°203+34: 23°234+35: 26°265+36: 29°296+37: 32°327+48: 36°368+49: 40°409+5PW: 45°45PW+5UW: 50°50UW+4SW: 54°54SW+4LW: 58°58LWClubGapLoft
Loft for each club, 3 to LW. The Gap row is the loft added from one club to the next; gaps run from 3° to 5°.
Ping G20 7-iron loft angleSide view of the club face tilted 32 degrees back from vertical, the loft of the 7-iron.32°VerticalFaceTarget
The 7-iron face, drawn at its 32° loft from the chart. Head shape is schematic, not to scale.

About the Ping G20

The G20 moved the G-series two degrees stronger at the 7-iron, from 34 degrees in the G15 to 32, and dropped the 2-iron from the stock line-up. The set uses a Custom Tuning Port to shift mass low and back. Published bounce figures were not part of the archived G20 chart and are omitted here. Ping's colour-code (dot) system sets lie angle relative to standard: gold 4 flat, brown 3 flat, orange 2 flat, red 1 flat, BLACK standard, blue 1 upright, green 2 upright, white 3 upright, silver 4 upright, maroon 5 upright. The lies below are the BLACK (standard) lies.

Related models

Frequently asked questions

What is the loft of a Ping G20 7-iron?

The Ping G20 7-iron has a loft of 32 degrees, a standard (black dot) lie of 62.25 degrees and a steel-shaft length of 36.75 inches.

When were Ping G20 irons made?

The G20 was introduced in 2011 and was replaced by the G25 in 2013.

Are Ping G20 lofts stronger than the G15?

Yes, by two degrees through most of the set. The G20 7-iron is 32 degrees against 34 for the G15.

Finding a used set

The Ping G20 ran from 2011 to 2013 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • Official Ping specification chart for the G20 irons (ping.com product spec page via archive.org)
  • Note: the archived G20 specification chart does not list per-club bounce; that key is omitted.
  • Note: year_discontinued is taken as the year the successor model was introduced, per the Ping model chronology.

Last updated 22 July 2026. Spot an error? info@loftchart.com