Srixon I-302 Irons Specifications
Full factory loft, lie and length chart for the Srixon I-302 irons, 2003–2005.
- Years produced
- 2003–2005
- Category
- Players Irons
- Construction
- forged cavity back
- Material
- forged 1025 carbon steel
- Set makeup
- 2–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Bounce |
|---|---|---|---|---|
| 2 | 18 | 59 | — | 0.5 |
| 3 | 21 | 59.5 | — | 1 |
| 4 | 24 | 60 | — | 1.5 |
| 5 | 27 | 60.5 | — | 2 |
| 6 | 30 | 61 | — | 2.5 |
| 7 | 34 | 61.5 | — | 3 |
| 8 | 38 | 62 | — | 3.5 |
| 9 | 42 | 62.5 | — | 4.5 |
| PW | 46 | 63 | — | 6 |
| AW | 51 | 63 | — | 7.5 |
| SW | 57 | 63 | — | 10 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Srixon I-302
The I-302 was Srixon's first widely-sold forged players iron in the US, a traditionally shaped cavity back forged from soft 1025 carbon steel with a six-times-struck process against the standard four. Its perimeter-weighted "Tour Cavity" varies in shape from long irons to short, placing the centre of gravity deep and low for a larger sweet spot while the thin topline and double-round radiused sole court accomplished players; stock shafts were Royal Precision Rifle 5.0/6.0. It is filed as a players iron on Srixon's own positioning. The factory chart ran 2-iron to sand wedge with per-club bounce but no lengths, so lengths are omitted here.
Stock shafts
- Royal Precision Rifle — steel · flexes: 5.0, 6.0
Related models
- Successor: Srixon I-506
- Cast game-improvement sibling: Srixon I-403 AD
- Later flagship of the forged line: Srixon I-701 Tour
- Compare: Srixon I-302 vs Srixon I-403 AD
Frequently asked questions
What is the loft of a Srixon I-302 7-iron?
The Srixon I-302 7-iron has a loft of 34 degrees, a lie of 61.5 degrees and 3 degrees of bounce per Srixon's factory chart.
What is special about the Srixon I-302's forging?
Srixon forged the 1025 carbon steel heads with a six-times-struck process rather than the standard four strikes, claiming more uniform grain and more precise face shaping.
What shafts came in the Srixon I-302?
Royal Precision Rifle steel shafts in 5.0 and 6.0 flexes were stock.
Finding a used set
The Srixon I-302 ran from 2003 to 2005 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Srixon's official I-302 specification chart (srixon.com/club_iron_i302.asp with images/clubs/i302_spec_s.gif, 2004, recovered via archive.org) — supplied every loft, lie and bounce figure above, the Royal Precision Rifle 5.0/6.0 stock shafts, and the perimeter-weighted Tour Cavity / 6x-struck 1025 forging construction used for the category here
- GolfWRX 'Lofts of the Srixon i-302's' thread (2007) — an owner-posted factory table matches the archived chart cell-for-cell, including the bounce ladder
- Golf Monthly and Golfmagic I-302 reviews (2003) — UK launch coverage aimed at low-to-mid handicappers; the I-506 replaced it in Srixon's forged line in 2005
- Club lengths were not printed on the factory chart and no corroborated length table survives, so lengths are omitted rather than inferred; offset and swing weight likewise. The published numbers are factory data, so confidence is high
Last reviewed 2026-07-29. Spot an error? [email protected]