TaylorMade M2 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade M2 irons, 2016–2016.
- Years produced
- 2016–2016
- Category
- Game Improvement Irons
- Construction
- investment cast with Speed Pocket sole slot
- Material
- stainless steel
- Set makeup
- 4–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 4 | 19 | 61 | 38.875 | 0.248 | D2 |
| 5 | 21.5 | 61.75 | 38.25 | 0.228 | D2 |
| 6 | 25 | 62.5 | 37.625 | 0.209 | D2 |
| 7 | 28.5 | 63 | 37 | 0.185 | D2 |
| 8 | 33 | 63.5 | 36.5 | 0.157 | D2 |
| 9 | 38 | 64 | 36 | 0.138 | D2 |
| PW | 43.5 | 64.5 | 35.5 | 0.118 | D2 |
| AW | 49 | 64.5 | 35.5 | 0.098 | D2 |
| SW | 55 | 64.5 | 35.25 | 0.098 | D3 |
| LW | 60 | 64.5 | 35 | 0.098 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop TaylorMade M2
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the TaylorMade M2
The 2016 M2 was TaylorMade's distance-oriented game-improvement iron. Three weight-saving features, an L-shaped toe, a 360-degree undercut cavity and a thick-thin fluted hosel, let the designers push the centre of gravity very low, which is what allowed them to use unusually strong lofts without losing peak height. A large unsupported thin face with Inverted Cone Technology and a Speed Pocket in the sole add ball speed. The 7-iron is 28.5 degrees, roughly a traditional 5-iron loft. Specs below are the men's standard steel-shaft build.
Stock shafts
- TaylorMade REAX 88 HL — steel · 88 g · flexes: R, S
- TaylorMade REAX — graphite · 45-75 g · flexes: L, M, R, S
Related models
Frequently asked questions
What is the loft of a TaylorMade M2 7-iron?
The 2016 TaylorMade M2 7-iron has a loft of 28.5 degrees, with a 63-degree lie and a 37-inch steel-shaft length.
Why are the 2016 M2 iron lofts so strong?
TaylorMade used an L-shaped toe, a 360-degree undercut cavity and a thick-thin fluted hosel to move the centre of gravity extremely low in the head. A lower centre of gravity launches the ball higher for a given loft, so the lofts could be strengthened for distance without the ball flight getting too flat.
What is the pitching wedge loft on the 2016 M2?
The 2016 M2 pitching wedge is 43.5 degrees. The set also offers a 49-degree approach wedge, a 55-degree sand wedge and a 60-degree lob wedge.
Does the 2016 M2 iron set include a 3-iron?
No. The stock 2016 M2 set runs from the 4-iron, which is 19 degrees, down through the wedges.
Finding a used set
The TaylorMade M2 ran from 2016 to 2016 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official 2016 M2 Irons spec sheet, taylormadegolf.com/docs/productspecs/2016/M2-Irons.PDF
Last updated 22 July 2026. Spot an error? info@loftchart.com