TaylorMade Stealth HD Irons Specifications
Full factory loft, lie and length chart for the TaylorMade Stealth HD irons, 2022–2023.
- Years produced
- 2022–2023
- Category
- Super Game Improvement Irons
- Construction
- investment cast Cap Back design, draw-biased
- Material
- stainless steel
- Set makeup
- 5–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 5 | 23.5 | 62.5 | 38.5 | 0.205 | 11 | D1 |
| 6 | 26.5 | 63 | 37.88 | 0.185 | 11 | D1 |
| 7 | 30 | 63.5 | 37.25 | 0.165 | 11 | D1 |
| 8 | 34 | 64 | 36.75 | 0.15 | 12 | D1 |
| 9 | 38.5 | 64.5 | 36.25 | 0.134 | 13 | D1 |
| PW | 44.5 | 65 | 35.75 | 0.118 | 15 | D1 |
| AW | 49 | 65 | 35.5 | 0.098 | 15 | D1 |
| SW | 54 | 65 | 35.25 | 0.079 | 16 | D2 |
| LW | 59 | 65 | 35 | 0.067 | 16 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade Stealth HD
Stealth HD was a line extension alongside the 2022 Stealth iron rather than a replacement for it, aimed at slower swing speeds and at players who miss to the right. It uses the same Cap Back design and ECHO Damping System but adds a draw bias, a very low centre of gravity that shifts progressively higher through the set, and much wider soles. Bounce is far higher than on the standard Stealth, from 11 degrees in the 5-iron to 16 degrees in the sand and lob wedges, and the lie angles are half a degree to one degree more upright. The 7-iron is 30 degrees, two degrees weaker than the standard Stealth. Specs below are the men's standard steel-shaft build.
Stock shafts
- KBS Max 85 MT — steel · 93 g · flexes: R, S
- Fujikura Speeder NX Red/Silver — graphite · 50-60 g · flexes: A, R, S
Related models
Frequently asked questions
What is the loft of a TaylorMade Stealth HD 7-iron?
The TaylorMade Stealth HD 7-iron has a loft of 30 degrees, with a 63.5-degree lie and a 37.25-inch steel-shaft length.
How is the Stealth HD different from the standard Stealth iron?
Stealth HD is a draw-biased, higher-launching companion model rather than a replacement. Its lofts are about two degrees weaker (30 degrees at the 7-iron against 28), its lie angles are half a degree to one degree more upright, and its bounce is roughly twice as high across the set.
Does the Stealth HD iron set include a 4-iron?
No. The Stealth HD set starts at the 5-iron, which is 23.5 degrees, and runs through to a 59-degree lob wedge. TaylorMade expected buyers to fill the long-iron gap with hybrids or fairway woods.
What is the pitching wedge loft on the Stealth HD?
The Stealth HD pitching wedge is 44.5 degrees, a degree and a half weaker than the standard Stealth. It is followed by a 49-degree approach wedge, a 54-degree sand wedge and a 59-degree lob wedge.
Finding a used set
The TaylorMade Stealth HD is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official Stealth HD Irons product page specifications table, taylormadegolf.com/Stealth-HD-Irons/DW-TC502.html (archived January 2023 via archive.org)
Last reviewed 2026-07-22. Spot an error? [email protected]