Titleist 716 AP1 Irons Specifications
Full factory loft, lie and length chart for the Titleist 716 AP1 irons, 2015–2017.
- Years produced
- 2015–2017
- Category
- Game Improvement Irons
- Construction
- cast with an extreme 360-degree undercut cavity
- Material
- cast stainless steel with extreme high-density tungsten weighting
- Set makeup
- 3–W2
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 19 | 60 | 39 | 0.236 | D1 |
| 4 | 22 | 61 | 38.5 | 0.209 | D1 |
| 5 | 25 | 62 | 38 | 0.177 | D1 |
| 6 | 28 | 62.5 | 37.5 | 0.157 | D1 |
| 7 | 31 | 63 | 37 | 0.137 | D1 |
| 8 | 35 | 63.5 | 36.5 | 0.118 | D1 |
| 9 | 39 | 64 | 36 | 0.11 | D1 |
| PW | 43 | 64 | 35.75 | 0.098 | D1 |
| W | 47 | 64 | 35.5 | 0.091 | D1 |
| W2 | 52 | 64 | 35.5 | 0.091 | D1 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 716 AP1
The 716 AP1 is the game-improvement model of Titleist's 716 range, announced in September 2015 and sold as the 2016 line, which Titleist billed as its longest, most forgiving iron ever. An extreme 360-degree undercut cavity leaves a large, thin unsupported face for speed and launch, while extreme high-density tungsten drives the centre of gravity low and pushes weight to the perimeter for a high moment of inertia. Lofts moved about a degree stronger than the 714 AP1 through most of the set — 31 degrees at the 7-iron against 32, and a 43-degree pitching wedge against 44 — with the set running 3-iron through two wedges badged W at 47 degrees and W2 at 52. The whole set is built to a D1 swing weight, and Titleist published per-club offset in inches. The 718 AP1 replaced it in 2017.
Stock shafts
- True Temper XP90 — steel · 95g-97g · flexes: R300, S300
- Mitsubishi Kuro Kage TiNi 65 — graphite · 61g-66g · flexes: A, R, S
- Mitsubishi Kuro Kage TiNi 50 — graphite · 52g · flexes: L
Related models
- Predecessor: Titleist 714 AP1
- Successor: Titleist 718 AP1
- Players sibling: Titleist 716 AP2
- Compare: Titleist 716 AP1 vs Titleist 714 AP1
- Compare: Titleist 716 AP1 vs Titleist 718 AP1
- Compare: Titleist 716 AP1 vs Titleist 716 AP2
Frequently asked questions
What is the loft of a Titleist 716 AP1 7-iron?
The Titleist 716 AP1 7-iron has a loft of 31 degrees, a lie of 63 degrees and a standard steel length of 37 inches.
How do the 716 AP1 lofts compare with the 714 AP1?
About a degree stronger through most of the set. The 7-iron went from 32 to 31 degrees and the pitching wedge from 44 to 43, with the two set wedges dropping from 48 and 52 to 47 and 52 degrees.
What wedges came with the Titleist 716 AP1?
The set ran to two gap-style wedges below the 43-degree pitching wedge: a 47-degree W and a 52-degree W2, both at 35.5 inches with 64-degree lies.
When were Titleist 716 AP1 irons made?
Titleist announced the 716 range in September 2015 and sold it as the 2016 line; the 718 AP1 replaced it in 2017.
Finding a used set
The Titleist 716 AP1 ran from 2015 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist archived 716 AP1 product page, titleist.com/golf-clubs/irons/716-AP1, via the Internet Archive (22 January 2017 capture) — full specification table: loft, lie, offset in inches, length and D1 swing weight for the 3-iron through the 52-degree W2, plus 'Available Irons: 3-W52 (RH/LH)' and the $125-per-club steel MSRP
- Same archived page, stock shaft and grip block: True Temper XP90 (R300/S300, 95g/97g), MRC Kuro Kage TiNi 65 (A/R/S, 61-66g), MRC Kuro Kage TiNi 50 (L, 52g) and the Golf Pride Tour Velvet 360 grip
- Same archived page, technology copy: 'The longest, most forgiving Titleist iron ever', the extreme 360-degree undercut cavity with a large thin unsupported face, and extreme high-density tungsten for a low CG and high MOI
- Team Titleist tour blog post 'The New 716 AP1 Irons - The Longest, Most Forgiving Titleist Iron Ever', dated 22 September 2015 — announcement year per the repository convention; the range shipped as the 2016 line. year_discontinued is 2017, when the 718 AP1 was announced
Last reviewed 2026-07-28. Spot an error? [email protected]