Titleist 716 MB Irons Specifications
Full factory loft, lie and length chart for the Titleist 716 MB irons, 2015–2017.
- Years produced
- 2015–2017
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- 1025 carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 21 | 60 | 39 | 0.126 | D2 |
| 4 | 24 | 61 | 38.5 | 0.122 | D2 |
| 5 | 27 | 62 | 38 | 0.114 | D2 |
| 6 | 31 | 62.5 | 37.5 | 0.11 | D2 |
| 7 | 35 | 63 | 37 | 0.098 | D2 |
| 8 | 39 | 63.5 | 36.5 | 0.091 | D2 |
| 9 | 43 | 64 | 36 | 0.079 | D2 |
| PW | 47 | 64 | 35.75 | 0.075 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 716 MB
The 716 MB continues Titleist's pure muscleback line without touching the numbers: 21 to 47 degrees from 3-iron to pitching wedge at the same lies and lengths the 712 and 714 used. What changed for this generation is the refinement of the sole and the offset progression, which is published to three decimal places and steps down from 0.126 inches at the 3-iron to 0.075 at the pitching wedge. Figures are the men's standard right-handed steel build.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: S300, X100
- Project X — steel
- FST KBS Tour — steel
Related models
- Predecessor: Titleist 714 MB
- Successor: Titleist 718 MB
- Cavity-back sibling: Titleist 716 CB
- Players sibling: Titleist 716 AP2
- Compare: Titleist 716 MB vs Titleist 716 AP2
- Compare: Titleist 716 MB vs Titleist 716 T-MB
Frequently asked questions
What is the loft of a Titleist 716 MB 7-iron?
The Titleist 716 MB 7-iron has a loft of 35 degrees, a lie of 63.0 degrees and a steel-shaft length of 37.00 inches.
When were Titleist 716 MB irons made?
The 716 line was announced in 2015 and was replaced by the 718 line in 2017.
Have Titleist MB lofts changed between generations?
No. The 712, 714, 716 and 718 musclebacks all run 21, 24, 27, 31, 35, 39, 43 and 47 degrees from 3-iron to pitching wedge at the same lies and lengths.
What is the difference between the 716 MB and the 716 CB?
The MB is a full muscleback for the smallest head and most workability; the CB is a cavity back with a co-forged tungsten weight in the long irons for more forgiveness at the same lofts.
Finding a used set
The Titleist 716 MB ran from 2015 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Titleist 716 MB Iron Set specification table — loft, lie, length, offset and swing weight for the 3-iron through pitching wedge, the 3-PW / 4-PW / 5-PW set ranges and the shaft options.
- Note: bounce was not published in the source consulted and is omitted rather than estimated.
Last reviewed 2026-07-28. Spot an error? [email protected]