Titleist 714 MB Irons Specifications
Full factory loft, lie and length chart for the Titleist 714 MB irons, 2013–2015.
- Years produced
- 2013–2015
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- 1025 carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 21 | 60 | 39 | 0.125 | 2 | D2 |
| 4 | 24 | 61 | 38.5 | 0.12 | 3 | D2 |
| 5 | 27 | 62 | 38 | 0.115 | 4 | D2 |
| 6 | 31 | 62.5 | 37.5 | 0.11 | 4.5 | D2 |
| 7 | 35 | 63 | 37 | 0.1 | 5 | D2 |
| 8 | 39 | 63.5 | 36.5 | 0.09 | 6 | D2 |
| 9 | 43 | 64 | 36 | 0.08 | 7 | D2 |
| PW | 47 | 64 | 35.75 | 0.075 | 8 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 714 MB
The 714 MB is the 2014-model-year muscleback in Titleist's numbered line, forged from a block of 1025 carbon steel with tour-preferred constant blade lengths and minimal progressive offset. Lofts, lies, lengths and offsets are unchanged from the 712 MB, and Titleist publishes a progressive bounce for this generation running 2 degrees at the 3-iron to 8 at the pitching wedge. Figures are the men's standard right-handed steel build.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: S200, S300, X100
- Project X — steel
- Nippon N.S. Pro Modus 3 — steel
Related models
- Predecessor: Titleist 712 MB
- Successor: Titleist 716 MB
- Cavity-back sibling: Titleist 714 CB
- Players sibling: Titleist 714 AP2
- Compare: Titleist 714 MB vs Titleist 714 AP1
- Compare: Titleist 714 MB vs Titleist 714 AP2
Frequently asked questions
What is the loft of a Titleist 714 MB 7-iron?
The Titleist 714 MB 7-iron has a loft of 35 degrees, a lie of 63.0 degrees, a steel-shaft length of 37.00 inches and 5 degrees of bounce.
When were Titleist 714 MB irons made?
The 714 line was announced in 2013 as the 2014 range and was replaced by the 716 line in 2015.
Are 712 MB and 714 MB specs the same?
Yes for loft, lie, length and offset — both run 21 to 47 degrees from 3-iron to pitching wedge at identical lengths. The 714 generation is where Titleist published the progressive bounce figures for the muscleback.
How much offset does a Titleist 714 MB have?
0.125 inches at the 3-iron tapering to 0.075 inches at the pitching wedge — minimal and progressive, as Titleist describes it.
Finding a used set
The Titleist 714 MB ran from 2013 to 2015 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist 714 MB published specification chart as reproduced by the qsponge.com 714 MB listing and the GolfWRX 'Titleist 714 AP1, AP2, CB & MB Irons Specifications' thread — loft, lie, length, bounce and offset for the 3-iron through pitching wedge.
- 2ndswing.com Titleist 714 MB Iron Set page — confirms the forged 1025 carbon steel construction, the constant blade lengths and the minimal progressive offset, though its table was unavailable.
- Note on the year: Titleist announced the 714 line in 2013 and marketed it as the 2014 range, so year_introduced records the announcement year per this database's convention.
Last reviewed 2026-07-28. Spot an error? [email protected]