Titleist 714 AP2 vs Titleist 714 MB
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | 714 AP2 loft | 714 MB loft | 714 AP2 lie | 714 MB lie | 714 AP2 length | 714 MB length |
|---|---|---|---|---|---|---|
| 3 | 21 | 21 | 60 | 60 | 39 | 39 |
| 4 | 24 | 24 | 61 | 61 | 38.5 | 38.5 |
| 5 | 27 | 27 | 62 | 62 | 38 | 38 |
| 6 | 30 | 31 | 62.5 | 62.5 | 37.5 | 37.5 |
| 7 | 34 | 35 | 63 | 63 | 37 | 37 |
| 8 | 38 | 39 | 63.5 | 63.5 | 36.5 | 36.5 |
| 9 | 42 | 43 | 64 | 64 | 36 | 36 |
| PW | 46 | 47 | 64 | 64 | 35.75 | 35.75 |
| W | 50 | — | 64 | — | 35.5 | — |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- 714 AP2
- 714 MB
What the differences mean
At the 7-iron, the 714 AP2 is 34° and the 714 MB is 35°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the 714 AP2 should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the 714 MB. Across the 8 clubs both sets share, the 714 MB averages 0.6° weaker, with the largest gap at the 6-iron (30° vs 31°). The pitching wedges are 46° and 47°; the stronger one leaves a 4° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the 714 AP2 runs 3-iron to W (9 clubs), the 714 MB 3-iron to PW (8 clubs).
The 714 AP2 is a players iron and the 714 MB a blade iron, so they sit one step apart on the forgiveness scale. The 714 AP2 is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly scratch to 10 handicaps. The 714 MB trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits low single-digit handicaps who strike the ball consistently.
The 714 AP2 is listed as forged, multi-material dual cavity and the 714 MB as forged. The 714 AP2 adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
Both sets were introduced in 2013, so this is a choice between two models from the same lineup rather than an upgrade: Titleist designed them to sit side by side for different players.
Which should you choose?
The 714 MB is the weaker-lofted set — up to 1° weaker than the 714 AP2. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Titleist 714 AP2 specs and Titleist 714 MB specs.
Frequently asked questions
Is the Titleist 714 AP2 stronger lofted than the 714 MB?
Yes. The Titleist 714 AP2 7-iron is 34° against 35° for the 714 MB, 1° stronger, which is worth roughly 3 to 4 yards of extra carry with the same swing.
What is the loft difference between the Titleist 714 AP2 and 714 MB?
At the 7-iron the difference is 1° (34° vs 35°). The largest gap on a shared club is 1° at the 6-iron, and 5 of the 8 shared clubs differ.
Which is better for higher handicap golfers, the Titleist 714 AP2 or the 714 MB?
The Titleist 714 AP2. As a players iron it is the more forgiving design, suited to roughly scratch to 10 handicaps. The 714 MB is a blade iron, better suited to low single-digit handicaps who strike the ball consistently.
Do the Titleist 714 AP2 and 714 MB have the same lie and length?
At the 7-iron, yes: both are 63° lie and 37 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.