Titleist 714 AP2 Irons Specifications
Full factory loft, lie and length chart for the Titleist 714 AP2 irons, 2013–2015.
- Years produced
- 2013–2015
- Category
- Players Irons
- Construction
- forged, multi-material dual cavity
- Material
- forged 1025 carbon steel with high-density tungsten weighting in the heel and toe
- Set makeup
- 3–W
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 21 | 60 | 39 | 0.16 | — | D2 |
| 4 | 24 | 61 | 38.5 | 0.145 | 1 | D2 |
| 5 | 27 | 62 | 38 | 0.13 | 3 | D2 |
| 6 | 30 | 62.5 | 37.5 | 0.12 | 4 | D2 |
| 7 | 34 | 63 | 37 | 0.11 | 4 | D2 |
| 8 | 38 | 63.5 | 36.5 | 0.1 | 5 | D2 |
| 9 | 42 | 64 | 36 | 0.09 | 6 | D2 |
| PW | 46 | 64 | 35.75 | 0.085 | 7 | D2 |
| W | 50 | 64 | 35.5 | 0.08 | 7 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 714 AP2
The 714 AP2 is the fourth-generation AP2 and one of the most widely played players irons of its era. It is forged from 1025 carbon steel with roughly 43 grams of high-density tungsten placed in the heel and toe during the forging process, which moves the centre of gravity low and toward the perimeter without enlarging the head. Compared with the 710 AP2 the lofts are one degree stronger from the 6-iron down, giving a 34 degree 7-iron and a 46 degree pitching wedge.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Earlier generation: Titleist 710 AP2 (via the 712 AP2)
- Compare: Titleist 714 AP2 vs Titleist 710 AP2
- Compare: Titleist 714 AP2 vs Titleist 712 AP2
- Compare: Titleist 714 AP2 vs Titleist 716 AP2
- Compare: Titleist 714 AP2 vs Titleist 714 CB
Frequently asked questions
What is the loft of a Titleist 714 AP2 7-iron?
The Titleist 714 AP2 7-iron has a loft of 34 degrees, with a 63 degree lie and a 37 inch standard steel length.
What is the pitching wedge loft on the Titleist 714 AP2?
The 714 AP2 pitching wedge is 46 degrees, and the matching gap wedge, badged W, is 50 degrees.
What are the Titleist 714 AP2 irons made of?
They are forged from 1025 carbon steel with roughly 43 grams of high-density tungsten placed in the heel and toe during forging.
Finding a used set
The Titleist 714 AP2 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndSwing.com Titleist 714 AP2 iron set specification table (loft, lie, length, offset, swingweight, 2013 release)
- Titleist 714 AP2 published spec chart (loft, lie, length, bounce, offset) as reproduced in retailer and spec-database listings
- GolfWRX, 'Tech Talk: Titleist 714 AP1, AP2, CB and MB irons' - forged 1025 carbon steel, 43g tungsten in heel and toe, Dynamic Gold stock shaft
Last reviewed 2026-07-22. Spot an error? [email protected]