Titleist 718 AP2 Irons Specifications
Full factory loft, lie and length chart for the Titleist 718 AP2 irons, 2017–2019.
- Years produced
- 2017–2019
- Category
- Players Irons
- Construction
- co-forged, multi-material dual cavity
- Material
- forged 1025 carbon steel with high-density tungsten perimeter weighting
- Set makeup
- 3–W
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 3 | 21 | 60 | 39 | 0.161 |
| 4 | 24 | 61 | 38.5 | 0.15 |
| 5 | 27 | 62 | 38 | 0.138 |
| 6 | 30 | 62.5 | 37.5 | 0.122 |
| 7 | 34 | 63 | 37 | 0.11 |
| 8 | 38 | 63.5 | 36.5 | 0.098 |
| 9 | 42 | 64 | 36 | 0.087 |
| PW | 46 | 64 | 35.75 | 0.075 |
| W | 50 | 64 | 35.5 | 0.063 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 718 AP2
The 718 AP2 is the sixth and final AP2 before the line became the T-Series. It retains the co-forged 1025 carbon steel construction with high-density tungsten in the heel and toe, and carries the same lofts as the 714 and 716 before it: a 34 degree 7-iron and a 46 degree pitching wedge across a 3-iron to 50 degree gap wedge set. Titleist published the 718 offsets in millimetres rather than inches, running 4.1mm at the 3-iron down to 1.6mm at the gap wedge. Stock steel was the ascending-mass True Temper AMT Tour White.
Stock shafts
- True Temper AMT Tour White — steel · 107g-130g · flexes: R300, S300, X100
Related models
- Compact sibling: Titleist 718 CB
- Compare: Titleist 718 AP2 vs Titleist 716 AP2
- Compare: Titleist 718 AP2 vs Titleist 718 AP1
- Compare: Titleist 718 AP2 vs Titleist T100
- Compare: Titleist 718 AP2 vs Titleist 718 CB
- Compare: Titleist 718 AP2 vs Titleist 718 AP3
Frequently asked questions
What is the loft of a Titleist 718 AP2 7-iron?
The Titleist 718 AP2 7-iron is 34 degrees, with a 63 degree lie and a 37 inch standard steel length.
What replaced the Titleist 718 AP2?
The T100, launched in 2019, replaced the 718 AP2 as Titleist's tour players iron and carried the same 34 degree 7-iron loft.
What is the offset on the Titleist 718 AP2?
Titleist published 718 offsets in millimetres: 4.1mm at the 3-iron tapering to 1.6mm at the gap wedge, which is roughly .161 to .063 inches.
Finding a used set
The Titleist 718 AP2 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist archived product page, titleist.com/golf-clubs/irons/718-ap2, via the Internet Archive (combined '718 Iron Specifications' table covering AP1/AP2/AP3/T-MB/CB/MB: loft, offset in mm, shared lie and length rows)
- Offsets converted from the published millimetre figures to inches for consistency with the rest of the archive
Last reviewed 2026-07-22. Spot an error? [email protected]