Titleist T350 Irons Specifications
Full factory loft, lie and length chart for the Titleist T350 irons, 2023–2025.
- Years produced
- 2023–2025
- Category
- Game Improvement Irons
- Construction
- hollow-body cast with Max Impact internal support
- Material
- cast stainless steel with high-density tungsten weighting
- Set makeup
- 4–W53
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 4 | 20 | 61.5 | 38.5 | 0.213 | D1 |
| 5 | 23 | 62 | 38 | 0.185 | D1 |
| 6 | 26 | 62.5 | 37.5 | 0.165 | D1 |
| 7 | 29 | 63 | 37 | 0.146 | D1 |
| 8 | 33 | 63.5 | 36.5 | 0.126 | D1 |
| 9 | 38 | 64 | 36 | 0.106 | D1 |
| PW | 43 | 64 | 35.75 | 0.087 | D1 |
| W48 | 48 | 64 | 35.5 | 0.075 | D1 |
| W53 | 53 | 64 | 35.5 | 0.063 | D1 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Titleist T350
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Titleist T350
The T350 is the 2023 game-improvement iron that replaced the T300, keeping its predecessor's loft ladder exactly — a 29 degree 7-iron and a 43 degree pitching wedge — while shrinking the head slightly and moving to a D1 build rather than D2. It retains the hollow cast body with Max Impact internal support and high-density tungsten weighting. It is the most heavily offset iron in the T-Series, running .213 inches at the 4-iron and .146 inches at the 7-iron, roughly 60 percent more than the T200.
Stock shafts
- True Temper AMT Red — steel · flexes: R300, S300
Related models
Frequently asked questions
What is the loft of a Titleist T350 7-iron?
The Titleist T350 7-iron is 29 degrees, with a 63 degree lie and a 37 inch standard steel length.
Is the Titleist T350 the same loft as the T300?
Yes. The T350 carries the T300 loft ladder unchanged, from 20 degrees at the 4-iron to 53 degrees at the second wedge, including a 29 degree 7-iron.
How much offset does the Titleist T350 have?
The T350 is the most offset iron in the T-Series, at .213 inches in the 4-iron and .146 inches in the 7-iron.
Finding a used set
The Titleist T350 ran from 2023 to 2025 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist official 2023 T-Series specification table, archived 6 August 2023: titleist.com, archived 2023 — manufacturer lie and length rows shared by the T-Series; gives 64 degrees for every club from the 9-iron down, including the 53 degree wedge.
- 2ndSwing.com Titleist 2023 T350 iron set specification table (loft, length, offset, swing weight)
- GolfDiscount.com and GolfHubz Titleist T350 specification tables - used for the lie progression, where they agree with each other and with the rest of the T-Series against a differing 2ndSwing column
- Lie angles carry a source conflict: 2ndSwing lists the column half a degree lower across the set. The two-source progression used here matches every other T-Series model
- Titleist does not publish per-club bounce for the T-Series, which uses a variable-bounce sole; the column is absent from every published spec table and is therefore omitted here rather than estimated
- year_discontinued is 2025, when Titleist announced the second-generation T350 as part of the 2025 T-Series (pre-orders 10 July, retail 21 August 2025)
Last updated 29 September 2026. Spot an error? info@loftchart.com