Wilson Staff D200 Irons Specifications
Full factory loft, lie and length chart for the Wilson Staff D200 irons, 2015–2017.
- Years produced
- 2015–2017
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 4–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 21 | 60 | 39 |
| 5 | 24 | 61 | 38.5 |
| 6 | 27 | 61.5 | 38 |
| 7 | 31 | 62 | 37.5 |
| 8 | 35 | 63 | 37 |
| 9 | 39 | 63.5 | 36.5 |
| PW | 43 | 64 | 36 |
| GW | 47 | 64 | 35.75 |
| SW | 55 | 64 | 35.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Staff D200
The D200 continued Wilson's superlight D-series game-improvement line, keeping the large undercut cavity of the D100 but thinning the cavity bottom so the face could flex faster and adding weight pods in the heel and toe that Wilson claimed raised MOI by five percent. The sole was raised and narrowed slightly compared with the D100. Lofts are moderate-strong for the class, with a 31-degree 7-iron and a 43-degree pitching wedge, and the 47-degree gap wedge fills the large gap to the 55-degree sand wedge. Figures below are the standard men's steel specification for the 4-iron through sand wedge ladder.
Stock shafts
- True Temper superlight steel (uniflex) — steel
Related models
- Predecessor: Wilson Staff D100
- Successor: Wilson Staff D300
- Compare: Wilson Staff D200 vs Wilson Staff C200
- Compare: Wilson Staff D200 vs Wilson Staff D300
Frequently asked questions
What is the loft of a Wilson Staff D200 7-iron?
The Wilson Staff D200 7-iron has a loft of 31 degrees, with a 62-degree lie and a 37.5-inch steel-shaft length.
What clubs come in a stock Wilson Staff D200 set?
The core set is 4-iron through pitching wedge, with a 47-degree gap wedge and a 55-degree sand wedge available to complete the bottom of the bag.
What changed from the Wilson D100 to the D200?
The D200 kept the D100's large undercut cavity but thinned the cavity bottom for more face flex, added heel and toe weight pods for about five percent more MOI, and raised and narrowed the sole slightly.
Finding a used set
The Wilson Staff D200 ran from 2015 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- qsponge.com Wilson Staff D200 spec table (retrieved July 2026) - supplied loft, lie and length for 4-iron through SW. Secondary aggregator, not a Wilson sheet.
- Golfalot 'Wilson Staff D200 Irons Review' (May 2015) - independently confirms the 43-degree PW, 47-degree GW and 55-degree SW, the uniflex True Temper stock steel shaft, the weight-pod construction and the 2015 release.
- 2nd Swing Golf D200 listings - corroborate the set composition (4-PW plus GW/SW options) and the superlight build. Wilson's own spec sheet for this generation is not retrievable, hence confidence: medium.
Last reviewed 2026-07-29. Spot an error? [email protected]