Wilson Staff D350 Irons Specifications
Full factory loft, lie and length chart for the Wilson Staff D350 irons, 2017–2019.
- Years produced
- 2017–2019
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 5–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 5 | 23 | 61 | 38.5 |
| 6 | 27 | 61.5 | 38 |
| 7 | 31 | 62 | 37.5 |
| 8 | 35 | 63 | 37 |
| 9 | 39 | 63.5 | 36.5 |
| PW | 43 | 64 | 36 |
| GW | 47 | 64 | 35.75 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Staff D350
The D350 was the superlight companion to the Staff D300 in Wilson's 2017 distance line, built around the same Speed Sole thin-face technology but with lighter head, shaft and grip weights while keeping a standard D2 swing weight. It was sold primarily as a hybrid-iron blend: the stock iron set is 5-iron through gap wedge, with matching hybrids offered in place of the long irons and an approach and sand wedge available to extend the set. Lofts match the D300 through most of the bag, with a 31-degree 7-iron and a 43-degree pitching wedge. Figures below are the standard men's specification for the 5-GW irons.
Related models
- Sibling: Wilson Staff D300
- Next generation: Wilson Staff D7
- Compare: Wilson Staff D350 vs Wilson Staff D300
- Compare: Wilson Staff D350 vs Wilson Staff D7
Frequently asked questions
What is the loft of a Wilson Staff D350 7-iron?
The Wilson Staff D350 7-iron has a loft of 31 degrees, with a 62-degree lie and a 37.5-inch steel-shaft length.
What is the difference between the Wilson D300 and D350 irons?
The D350 is the superlight version of the D300: same Speed Sole distance technology and essentially the same lofts, but with lighter head, shaft and grip weights, and it was sold as a hybrid-iron blend with matching hybrids replacing the long irons.
What clubs come in a stock Wilson Staff D350 set?
The stock iron set is 5-iron through gap wedge. Matching hybrids were offered in 3 through 6 to fill the top of the bag, and a 55-degree sand wedge was available to extend the bottom.
Finding a used set
The Wilson Staff D350 ran from 2017 to 2019 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2nd Swing Golf 'Wilson Staff D350 Iron Set' specification table (retrieved July 2026) - supplied loft, lie, length and D2 swing weight for 5-iron through GW.
- qsponge.com D350 spec table - matches the 2nd Swing rows exactly and extends the ladder with a 4-iron (19 degrees) and a 55-degree SW; those rows are omitted above because the 4-iron slot was normally filled by the matching hybrid and the extra rows lack independent corroboration.
- MyGolfSpy 'First Look: Wilson Staff D350 Hybrid/Iron Set' (2017) - the hybrid-iron blend concept, the 5-GW stock steel set and the 2017 launch.
- Plugged In Golf 'Wilson Staff D350 Irons Review' (December 2017) - Speed Sole technology, the light-total-weight/standard-D2-swing-weight build and the hybrid options from 3 through 6. The stock shaft model name is not published in any retrieved source, so stock_shafts is omitted.
Last reviewed 2026-07-29. Spot an error? [email protected]