Wilson Staff D7 Forged Irons Specifications
Full factory loft, lie and length chart for the Wilson Staff D7 Forged irons, 2020–2022.
- Years produced
- 2020–2022
- Category
- Players Distance Irons
- Construction
- forged
- Material
- forged 8620 carbon steel
- Set makeup
- 4–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 21.5 | 60 | 38.75 | 0.15 | 3 |
| 5 | 24.5 | 61 | 38.25 | 0.133 | 3.5 |
| 6 | 27.5 | 61.5 | 37.75 | 0.117 | 4.5 |
| 7 | 30.5 | 62 | 37.25 | 0.1 | 5 |
| 8 | 34.5 | 63 | 36.75 | 0.084 | 5.5 |
| 9 | 39 | 63.5 | 36.25 | 0.067 | 6.5 |
| PW | 44 | 64 | 35.75 | 0.05 | 7 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Wilson Staff D7 Forged
The D7 Forged took the Power Hole concept from the cast D7 and moved it into a forged 8620 carbon steel head aimed at players who want distance in a more compact package. A urethane-filled Power Chamber sits behind the face and the Power Holes are limited to the sole, so the look at address is much cleaner than the standard D7. Lofts are strong for the players-distance class, with a 30.5-degree 7-iron and a 44-degree pitching wedge. The stock set is 4-iron through pitching wedge, with a 49-degree gap wedge available to match; the figures below are the standard men's steel specification.
Stock shafts
- KBS $-Taper Lite — steel
- True Temper Catalyst 80 — graphite
Related models
- Successor: Wilson Staff D9 Forged
- Sibling: Wilson Staff D7
- Compare: Wilson Staff D7 Forged vs Wilson Staff D7
Frequently asked questions
What is the loft of a Wilson Staff D7 Forged 7-iron?
The Wilson Staff D7 Forged 7-iron has a loft of 30.5 degrees, with a 62-degree lie and a 37.25-inch steel-shaft length.
What is the difference between the Wilson D7 and D7 Forged irons?
The standard D7 is a cast game-improvement iron with Power Holes around the sole and toe; the D7 Forged uses a forged 8620 carbon steel head with a urethane-filled Power Chamber and sole-only Power Holes, in a smaller players-distance shape with slightly stronger lofts club for club.
What clubs come in a stock Wilson Staff D7 Forged set?
The stock set is 4-iron through pitching wedge, with a 49-degree gap wedge available as a matching add-on.
Finding a used set
The Wilson Staff D7 Forged ran from 2020 to 2022 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2nd Swing Golf 'Wilson Staff D7 Forged Single Iron' specification table (retrieved July 2026) - supplied loft, lie, length, offset and bounce for 4-iron through PW.
- A second circulated D7 Forged spec table (qsponge.com) matches the 2nd Swing rows exactly and extends the ladder with a 3-iron (19 degrees) and a 49-degree gap wedge; those add-on rows are omitted above because they lack a corroborated lie figure.
- Golfalot 'Wilson Staff D7 Forged Irons Review' - confirms the 30.5-degree 7-iron, the 4-PW stock set, the forged 8620 carbon steel head and the 2020 release.
- MyGolfSpy and TGW product pages - confirm the KBS $-Taper Lite stock steel shaft and True Temper Catalyst 80 stock graphite shaft.
Last reviewed 2026-07-29. Spot an error? [email protected]