Wilson Staff Model Blade (2024) Irons Specifications

Full factory loft, lie and length chart for the Wilson Staff Model Blade (2024) irons, 2024–2026.

Years produced: 2024–2026
Category: Blade / Muscleback
Construction: forged
Material: 8620 carbon steel
Set makeup: 4–PW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the Wilson Staff Model Blade (2024) irons.
Club	Loft (°)	Lie (°)	Length (in)	Offset (in)	Swing wt
4	23	60	38.75	0.1	D2
5	26	61	38.25	0.09	D2
6	30	61.5	37.75	0.08	D2
7	34	62	37.25	0.07	D2
8	38	63	36.75	0.063	D2
9	42	63.5	36.25	0.057	D2
PW	46	64	35.75	0.05	D2

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Loft progression

Loft for each club, 4 to PW. The Gap row is the loft added from one club to the next; gaps run from 3° to 4°.

The 7-iron face, drawn at its 34° loft from the chart. Head shape is schematic, not to scale.

About the Wilson Staff Model Blade (2024)

The second Staff Model Blade was announced on 11 January 2024 with a new Staff Model CB, both forged from 8620 carbon steel with Wilson's Fluid Feel hosel and extra mass in the toe. Lofts, lies and lengths are unchanged from the 2019 original, with a 34-degree 7-iron and a 46-degree pitching wedge. The stock set was 4-iron to pitching wedge with True Temper Dynamic Gold Mid 115 shafts; a retailer table also lists 2- and 3-irons, which are not recorded here because only one source gives them. Wilson replaced the model with the 2026 Staff Model Blade.

Stock shafts

True Temper Dynamic Gold Mid 115 — steel · 114-116 g · flexes: R, S, X

Related models

Frequently asked questions

What is the loft of a Wilson Staff Model Blade (2024) 7-iron?

The 2024 Staff Model Blade 7-iron has a loft of 34 degrees, a lie of 62 degrees and a steel-shaft length of 37.25 inches.

Did the lofts change from the 2019 Staff Model Blade?

No. The 4-iron through pitching wedge run 23, 26, 30, 34, 38, 42 and 46 degrees on both, with the same lies and lengths.

How does the 2024 Staff Model Blade differ from the 2024 Staff Model CB?

Lofts, lies and lengths are the same. The Blade is a muscle back with slightly less offset in the longer irons, 0.10 inches at the 4-iron against 0.11 on the CB.

What is the pitching wedge loft on the 2024 Staff Model Blade?

46 degrees.

Finding a used set

The Wilson Staff Model Blade (2024) ran from 2024 to 2026 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:

Two retailer specification tables that agree on every figure above for the 4-iron through pitching wedge: Golfio 'Wilson Staff Model Blades Forged Iron Set - 24' (golfio.com, retrieved 29 September 2026) and 2nd Swing 'Wilson Staff 2024 Staff Model Blade Iron Set' (2ndswing.com, retrieved 29 September 2026). Neither is a Wilson spec sheet: wilson.com could not be read, so confidence is medium.
golf.com 'Wilson Staff Model Blades, CB irons: Everything you need to know', published 11 January 2024 (golf.com) — announcement date, retail from 24 January 2024, the 4-PW stock set, forged 8620 carbon steel, the Fluid Feel hosel and the Dynamic Gold Mid 115 stock shaft.
Succession: Wilson announced a new family of Staff Model irons on 27 January 2026 (golfwrx.com), which sets year_discontinued.
Note: bounce appears in only one of the two tables and is omitted. 2nd Swing also lists a 2-iron (18 degrees) and a 3-iron (20 degrees); they are left out because no second source confirms them.

Last updated 29 September 2026. Spot an error? info@loftchart.com