Ben Hogan Fort Worth CB Irons Specifications
Full factory loft, lie and length chart for the Ben Hogan Fort Worth CB irons, 2025–present.
- Years produced
- 2025–present
- Category
- Players Irons
- Construction
- forged cavity back, co-forged Ceramic Matrix Composite (CMC) core
- Material
- 1025C carbon steel with a co-forged ceramic matrix composite core
- Set makeup
- 4–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 4 | 23 | 60 | 39 | 0.13 |
| 5 | 26 | 61 | 38.25 | 0.12 |
| 6 | 30 | 62 | 37.5 | 0.11 |
| 7 | 34 | 62.5 | 37 | 0.1 |
| 8 | 38 | 63 | 36.5 | 0.09 |
| 9 | 42 | 63.5 | 36 | 0.08 |
| PW | 46 | 64 | 35.75 | 0.07 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Ben Hogan Fort Worth CB
The Fort Worth CB is the cavity-back half of Ben Hogan Golf's 2025 Fort Worth relaunch, announced 14 January 2025 at the PGA Show alongside the Fort Worth MB, Legend and M50-01. Like the MB it is forged from 1025C carbon steel around a co-forged Ceramic Matrix Composite (CMC) core that lets Hogan manipulate each club's center of gravity, but the CB's open cavity pushes more of that mass to the perimeter for extra forgiveness on top of the MB's workability. It carries the same V-SOLE, with a high-bounce leading edge and softer, lower-bounce trailing edge. GolfMagic and GolfWRX describe it as a players/better-player cavity back that blends player and game-improvement characteristics for single-digit and low mid-handicap ball-strikers, and note it can be paired with the Fort Worth MB in a combo set. It ships 4-PW or 5-PW, hand-built to order in the USA. Ben Hogan's own spec table lists identical length, lie, offset, head weight, blade length and bounce figures for the Fort Worth CB and MB, so the two share the same external head dimensions and differ in their internal cavity/CMC construction rather than their outward geometry.
Stock shafts
- KBS Tour — steel · flexes: R, S, X
- KBS Tour TGI — graphite · 60g (R) / 80g (S) · flexes: R, S
Related models
Frequently asked questions
What is the loft of a Ben Hogan Fort Worth CB 7-iron?
The Ben Hogan Fort Worth CB 7-iron has a loft of 34 degrees, a lie of 62.5 degrees and a length of 37.00 inches, with 0.100 inches of offset.
What is the difference between the Ben Hogan Fort Worth CB and Fort Worth MB?
Internal construction, not external shape. Both are forged from 1025C carbon steel with a co-forged Ceramic Matrix Composite core and share identical length, lie, offset and bounce figures on Hogan's own spec chart. The CB opens an internal cavity to push weight to the perimeter for more forgiveness, while the MB is a solid muscle-back build aimed at workability.
What clubs come in a stock Ben Hogan Fort Worth CB set?
It ships as a 4-PW (7-piece) or 5-PW (6-piece) set, hand-built to order in the USA, priced from roughly $900 (5-PW) up to $1,049.99 depending on set size and shaft.
When was the Ben Hogan Fort Worth CB released?
It was announced 14 January 2025 at the PGA Show in Orlando, alongside the Fort Worth MB, Legend and M50-01.
Where it sits in the lineup
Introduced in 2025, the Ben Hogan Fort Worth CB is a current players set in the Ben Hogan range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Ben Hogan Golf official Fort Worth CB Irons product page, benhogangolf.com (retrieved August 2026) - full SPECIFICATIONS table (Club/Length/Lie/Loft/Offset-mm/Head Weight/Leading Bounce/Trailing Bounce/Blade Length) for 4 through PW: lengths 39.00-35.75in, lie 60-64deg, loft 23-46deg, offset 3.3-1.78mm, leading bounce 15.5-20.5deg, trailing bounce 4.4-9.4deg; page confirms 1025C carbon steel, co-forged CMC core, V-SOLE, 4-PW stock configuration and $999.99-$1,049.99 pricing
- Offset values converted from the millimeters on Hogan's table to inches (mm / 25.4) to match this database's unit convention, e.g. 3.3mm = 0.130in, 1.78mm = 0.070in
- GolfMagic, 'Ben Hogan Fort Worth CB Irons Review: Classic looks, classic performance' (golfmagic.com) - describes it as a players cavity back balancing workability with forgiveness for better ball-strikers and mid-handicappers approaching single digits, confirms the 1025C forging and CMC insert, and gives pricing from about $900 (5-PW) to $999 (full set); GolfWRX 'Ben Hogan Fort Worth CB & MB irons review - Club Junkie Reviews' (golfwrx.com) corroborates the CMC/V-SOLE construction and the combo-set pairing with the Fort Worth MB
- The First Call, 'Ben Hogan: Launching new equipment range at PGA Show', 14 January 2025 - confirms the joint announcement date and booth (#2301) for the Fort Worth MB, Fort Worth CB, Legend and M50-01, and describes the pair as targeting 'better golfers' with Ceramic Matrix technology that 'optimizes the COG for each club'
- Deviation worth flagging: Ben Hogan's official spec tables for the Fort Worth CB and Fort Worth MB are identical in every published column - loft, lie, length, offset, head weight, leading/trailing bounce and blade length - which was cross-checked directly against each model's own official page. Per Hogan's own data the two models share identical external head geometry and differ only in internal construction (an open, perimeter-weighted cavity on the CB vs. a solid muscle-back forging on the MB)
- Swing weight is not published on Hogan's current spec chart for this model and is omitted here accordingly
Last reviewed 2026-08-30. Spot an error? info@loftchart.com