Ben Hogan Fort Worth MB Irons Specifications
Full factory loft, lie and length chart for the Ben Hogan Fort Worth MB irons, 2025–present.
- Years produced
- 2025–present
- Category
- Blade / Muscleback
- Construction
- one-piece forged, co-forged Ceramic Matrix Composite (CMC) core
- Material
- 1025C carbon steel with a co-forged ceramic matrix composite core
- Set makeup
- 4–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 4 | 23 | 60 | 39 | 0.13 |
| 5 | 26 | 61 | 38.25 | 0.12 |
| 6 | 30 | 62 | 37.5 | 0.11 |
| 7 | 34 | 62.5 | 37 | 0.1 |
| 8 | 38 | 63 | 36.5 | 0.09 |
| 9 | 42 | 63.5 | 36 | 0.08 |
| PW | 46 | 64 | 35.75 | 0.07 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Ben Hogan Fort Worth MB
The Fort Worth MB is the muscle-back blade half of Ben Hogan Golf's 2025 Fort Worth relaunch, announced 14 January 2025 at the PGA Show alongside the Fort Worth CB, Legend and M50-01. It is forged from 1025C carbon steel with Hogan's Ceramic Matrix Composite (CMC) technology - a fibre-infused ceramic core, lighter than steel, co-forged into each head and precisely positioned to manipulate the center of gravity club by club. It keeps the V-SOLE, with a high-bounce leading edge and a softer, lower-bounce trailing edge. Reviewers (Golf Monthly, GolfWRX) describe it as a traditional, compact muscle-back blade for better players, with no distance-chasing loft jacking: the 7-iron sits at a traditional 34 degrees. It ships 4-PW or 5-PW, hand-built to order in the USA, and can be paired with the Fort Worth CB in a combo set. Ben Hogan's own spec table lists identical length, lie, head weight, blade length and bounce figures for the Fort Worth MB and CB, so the two share the same external head dimensions and differ in their internal cavity/CMC construction rather than their outward geometry.
Stock shafts
- KBS Tour — steel · flexes: R, S, X
- KBS Tour TGI — graphite · 60g (R) / 80g (S) · flexes: R, S
Related models
- Same 2025 launch, cavity back: Fort Worth CB
- Earlier Ben Hogan blade of the same Ft. Worth name: Ft. Worth Black
- Still-current Hogan muscle-back blade: ICON
- Same 2025 launch, hollow-body players-distance: Legend
- Compare: Ben Hogan Fort Worth MB vs Ben Hogan Legend
- Compare: Ben Hogan Fort Worth MB vs Ben Hogan M50-01
Frequently asked questions
What is the loft of a Ben Hogan Fort Worth MB 7-iron?
The Ben Hogan Fort Worth MB 7-iron has a loft of 34 degrees, a lie of 62.5 degrees and a length of 37.00 inches, with 0.100 inches of offset.
Is the Ben Hogan Fort Worth MB a blade or a cavity back?
It is a muscle-back blade - the workability-focused half of Hogan's 2025 Fort Worth relaunch, forged from 1025C carbon steel with a co-forged Ceramic Matrix Composite core. Its cavity-back sibling, the Fort Worth CB, launched the same day.
What clubs come in a stock Ben Hogan Fort Worth MB set?
It ships as a 4-PW (7-piece) or 5-PW (6-piece) set, hand-built to order in the USA, priced from about $899.99-$1,049.99 depending on set size and shaft.
When was the Ben Hogan Fort Worth MB released?
It was announced 14 January 2025 at the PGA Show in Orlando, alongside the Fort Worth CB, Legend and M50-01.
Where it sits in the lineup
Introduced in 2025, the Ben Hogan Fort Worth MB is a current blade set in the Ben Hogan range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Ben Hogan Golf official Fort Worth MB Irons product page, benhogangolf.com (retrieved August 2026) - full SPECIFICATIONS table (Club/Length/Lie/Loft/Offset-mm/Head Weight/Leading Bounce/Trailing Bounce/Blade Length) for 4 through PW: lengths 39.00-35.75in, lie 60-64deg, loft 23-46deg, offset 3.3-1.78mm, leading bounce 15.5-20.5deg, trailing bounce 4.4-9.4deg; page confirms 1025C carbon steel, co-forged CMC core, V-SOLE, 4-PW stock configuration and $999.99-$1,049.99 pricing
- The Golf Club Trader, 'Ben Hogan Fort Worth MB Iron Specifications' (thegolfclubtrader.com) - independently republishes an identical club-by-club table (loft, lie, leading/trailing bounce, head weight, blade length, offset, length), corroborating the official chart figure for figure
- Offset values converted from the millimeters on Hogan's table to inches (mm / 25.4) to match this database's unit convention, e.g. 3.3mm = 0.130in, 1.78mm = 0.070in
- Golf Monthly, 'Ben Hogan Fort Worth MB Irons Review' (golfmonthly.com, published March 2025) and GolfWRX 'Ben Hogan Fort Worth CB & MB irons review - Club Junkie Reviews' (golfwrx.com) - describe it as a forged muscle-back blade for skilled players, confirm the CMC core and V-SOLE, note the 7-iron's traditional 34-degree loft and give a 5-PW launch price of $899.99
- The First Call, 'Ben Hogan: Launching new equipment range at PGA Show', 14 January 2025 - confirms the joint announcement date and booth (#2301) for the Fort Worth MB, Fort Worth CB, Legend and M50-01
- Deviation worth flagging: Ben Hogan's official spec tables for the Fort Worth MB and Fort Worth CB are identical in every published column - loft, lie, length, offset, head weight, leading/trailing bounce and blade length. This was cross-checked against an independent source (thegolfclubtrader.com) for the MB and read the same way from the CB's own page, so it is recorded here as published rather than dismissed as a scraping error. Per Hogan's own data the two models share identical external head geometry and differ only in internal construction (solid muscle-back forging on the MB vs. a perimeter-weighted cavity on the CB)
- Swing weight is not published on Hogan's current spec chart for this model, unlike the 2018-era Ft. Worth Black chart, and is omitted here accordingly
Last reviewed 2026-08-30. Spot an error? info@loftchart.com