Callaway RAZR X Irons Specifications
Full factory loft, lie and length chart for the Callaway RAZR X irons, 2011–present.
- Years produced
- 2011–present
- Category
- Game Improvement Irons
- Construction
- cast with an undercut cavity and variable face thickness
- Material
- cast stainless steel
- Set makeup
- 3–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Bounce | Swing wt |
|---|---|---|---|---|---|
| 3 | 19 | 60.5 | 38.75 | 2 | D2 |
| 4 | 22 | 61 | 38.25 | 3 | D2 |
| 5 | 25 | 61.5 | 37.75 | 3.5 | D2 |
| 6 | 28 | 62 | 37.25 | 4 | D2 |
| 7 | 32 | 62.5 | 36.75 | 5 | D2 |
| 8 | 36 | 63 | 36.25 | 6 | D2 |
| 9 | 40 | 64 | 35.75 | 9 | D2 |
| PW | 44 | 65 | 35.25 | 9 | D2 |
| AW | 49 | 65 | 35.25 | 10.5 | D2 |
| SW | 54 | 65 | 35 | 13.5 | D4 |
| LW | 59 | 65 | 34.75 | 11 | D4 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Callaway RAZR X
RAZR X was the mainstream game-improvement iron in the range Callaway announced in January 2011 alongside the RAZR X Tour and the forged RAZR X. It pairs an integrated cup face and undercut cavity with a low, deep centre of gravity, and the bounce climbs steeply through the set — from 2 degrees at the 3-iron to 13.5 at the sand wedge. Lengths below are the steel build; the graphite build is a quarter inch longer at every club.
Stock shafts
- Callaway RAZR X Iron steel — steel
- Callaway RAZR X Iron graphite — graphite
Related models
- Callaway's previous game-improvement iron: Callaway X-22
- Callaway's next distance iron: Callaway X Hot
- Compare: Callaway RAZR X vs Callaway X-22
- Compare: Callaway RAZR X vs Callaway X Hot
Frequently asked questions
What is the loft of a Callaway RAZR X 7-iron?
The Callaway RAZR X 7-iron has a loft of 32 degrees, a lie of 62.5 degrees and a steel-shaft length of 36.75 inches.
When were Callaway RAZR X irons released?
Callaway announced the RAZR X line on 20 January 2011 and it reached retail on 18 February 2011.
What is the difference between RAZR X and RAZR X Forged?
RAZR X is the cast game-improvement model recorded on this page. RAZR X Forged, announced at the same time, is a 1020 carbon steel forging with a tour-shaped head — a different club with its own spec chart.
Where it sits in the lineup
Introduced in 2011, the Callaway RAZR X is a current game improvement set in the Callaway range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- 2nd Swing Golf specification table for the Callaway RAZR X iron set (https://www.2ndswing.com/golf-clubs/iron-sets/callaway-razr-x-iron-set) — supplied every loft, lie, bounce, both length columns and both swing-weight columns. The steel figures are the ones recorded here.
- prnewswire.com 'Callaway Golf Introduces New RAZR X Line of Irons', 20 January 2011 — the RAZR X, RAZR X Tour and RAZR X Forged were announced on that date with retail availability from 18 February 2011. Some listings date the line to 2010 because it was shown to trade late that year; the January 2011 press release is the announcement used here.
- Note: offset is omitted — the source table did not carry an offset column. Confidence is medium.
Last reviewed 2026-07-28. Spot an error? [email protected]