Callaway X-24 Hot Irons Specifications
Full factory loft, lie and length chart for the Callaway X-24 Hot irons, 2010–2011.
- Years produced
- 2010–2011
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel with a Stealth PVD finish
- Set makeup
- 4–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Bounce | Swing wt |
|---|---|---|---|---|---|
| 4 | 22 | 60.5 | 38.5 | 1 | D2 |
| 5 | 25 | 61 | 38 | 1.5 | D2 |
| 6 | 28 | 61.5 | 37.5 | 2 | D2 |
| 7 | 31 | 62 | 37 | 2.5 | D2 |
| 8 | 35 | 62.5 | 36.5 | 3.5 | D2 |
| 9 | 40 | 63 | 36 | 5 | D2 |
| PW | 45 | 63.5 | 35.5 | 7 | D2 |
| AW | 50 | 63.5 | 35.5 | 10 | D2 |
| SW | 55 | 64 | 35.25 | 14 | D4 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Callaway X-24 Hot
The X-24 Hot followed the X-22 as the game-improvement iron in Callaway's long-running X-Series, announced on 4 May 2010 and at retail from 28 May 2010. The face uses Callaway's VFT technology and thins progressively from sole to topline to lower the centre of gravity, over a 360-degree undercut channel, and the head carries a dark Stealth PVD finish. Callaway pitched it as the longest X-Series iron to date, with a 31 degree 7-iron and a 45 degree pitching wedge in a 4-SW set. Specs below are the standard men's steel-shaft numbers; the graphite build is a quarter inch longer at every club and swingweighted lighter.
Related models
- Predecessor: Callaway X-22
- Successor: Callaway RAZR X
- Compare: Callaway X-24 Hot vs Callaway Diablo Edge
- Compare: Callaway X-24 Hot vs Callaway RAZR X
- Compare: Callaway X-24 Hot vs Callaway X-22
Frequently asked questions
What is the loft of a Callaway X-24 Hot 7-iron?
The Callaway X-24 Hot 7-iron has a loft of 31 degrees, with a 62 degree lie and a 37 inch standard steel length.
What is the loft of a Callaway X-24 Hot pitching wedge?
The X-24 Hot pitching wedge is 45 degrees, with a 50 degree A-wedge and a 55 degree sand wedge.
Does the Callaway X-24 Hot come in a 3-iron?
No. Callaway's published chart runs from the 22 degree 4-iron to the 55 degree sand wedge, and the set was sold 4-SW.
How do X-24 Hot lofts compare with the X-22?
The X-24 Hot is two degrees stronger at the 7-iron — 31 degrees against the X-22's 33 — while both sets share a 45 degree pitching wedge, so the strengthening is concentrated in the middle irons.
Finding a used set
The Callaway X-24 Hot ran from 2010 to 2011 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Callaway Golf official X-24 HOT Irons specifications page, callawaygolf.com, archive.org capture of 8 May 2010 (web.archive.org/web/20100508060047/http://www.callawaygolf.com/Global/en-US/Products/Clubs/Irons/X-24HOTIrons/Specifications.html) — loft, lie, bounce, length and swingweight for both the Uniflex steel and graphite builds; the steel build is recorded here
- The Golf Wire, 'Callaway Golf Introduces New X-24 Hot Irons' — announced 4 May 2010 with retail availability from 28 May 2010
- Note on shafts: the archived Callaway spec page lists the stock steel as a True Temper-made Uniflex at 115-104 grams and the stock graphite as a Callaway Golf-branded X-24 shaft at 79-73 grams in Regular; because neither carries a retail model name, stock_shafts is omitted rather than paraphrased into one.
- Note on year_discontinued: recorded as 2011, the year Callaway announced the RAZR X family that replaced the X-Series game-improvement iron. This database dates a model's end to the announcement of its replacement, not to the last day it was sold.
Last reviewed 2026-07-28. Spot an error? [email protected]