Callaway X-16 Pro Series Irons Specifications
Full factory loft, lie and length chart for the Callaway X-16 Pro Series irons, 2002–2004.
- Years produced
- 2002–2004
- Category
- Players Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 1–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Swing wt |
|---|---|---|---|---|
| 1 | 16 | 58.5 | 40 | D2 |
| 2 | 18 | 59.2 | 39.5 | D2 |
| 3 | 21 | 59.9 | 39 | D2 |
| 4 | 24 | 60.6 | 38.5 | D2 |
| 5 | 27 | 61.3 | 38 | D2 |
| 6 | 30 | 62 | 37.5 | D2 |
| 7 | 34 | 62.5 | 37 | D2 |
| 8 | 38 | 63.5 | 36.5 | D2 |
| 9 | 42 | 64.5 | 36 | D2 |
| PW | 46 | 65 | 35.5 | D3 |
| AW | 50 | 65 | 35.5 | D3 |
| SW | 54 | 65 | 35.25 | D5 |
| LW | 58 | 65 | 35 | D5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Callaway X-16 Pro Series
The Steelhead X-16 Pro Series is the better-player version of the 2002 X-16, with a more compact, blade-like head, a thinner topline and less offset for shot-shaping and a lower flight. Callaway kept the published ladder identical to the standard X-16 — the same 34 degree 7-iron, the same upright 65 degree wedge lies and the same lengths — so the differences are in the head, not the chart. The catalogued range ran 1-iron to lob wedge, with 3-PW the usual retail set on Constant Weight steel shafts.
Related models
- Standard model: Callaway Steelhead X-16
- Successor: Callaway X-18 Pro Series
- The generation before: Callaway Steelhead X-14
- Compare: Callaway X-16 Pro Series vs Callaway X-18 Pro Series
- Compare: Callaway X-16 Pro Series vs Callaway Steelhead X-14
Frequently asked questions
What is the loft of a Callaway X-16 Pro Series 7-iron?
The Callaway X-16 Pro Series 7-iron is 34 degrees, with a 62.5 degree lie and a 37 inch standard steel length — the same published numbers as the standard X-16.
What is the difference between the X-16 and the X-16 Pro Series?
The Pro Series has a more compact, blade-like head with a thinner topline and less offset for better players. The published loft, lie and length ladder is identical to the standard X-16.
Are Callaway X-16 Pro Series irons forgiving?
Less so than the standard X-16 — the smaller head trades forgiveness for workability and a lower flight, which is why Callaway aimed the Pro Series at low-to-mid handicaps.
Finding a used set
The Callaway X-16 Pro Series ran from 2002 to 2004 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Callaway Demandware ProductSpecs feed (ProductSpecs-Get), the manufacturer-authored source behind the View Specs panel on callawaygolfpreowned.com, product code irons-bb-x16-ps — loft, lie, length and dual swing weight columns for the 1-iron through lob wedge
- 2ndswing.com Callaway X-16 Pro Series Iron Set specification table — agrees cell for cell on loft, lie and length; its single swing weight column (D2/D3/D5) matches the steel side of the Callaway feed and is the value recorded here
- Bounce and offset were not published for this model in the sources located, so those columns are omitted rather than estimated. Callaway published a bounce ladder for the standard X-16 but not the Pro Series
Last reviewed 2026-07-29. Spot an error? [email protected]