Cleveland CG4 Irons Specifications
Full factory loft, lie and length chart for the Cleveland CG4 irons, 2007–2009.
- Years produced
- 2007–2009
- Category
- Players Irons
- Construction
- —
- Material
- CMM (Cleveland Micro Metal)
- Set makeup
- 3–DW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 21 | 60.25 | 38.75 |
| 4 | 24 | 60.75 | 38.25 |
| 5 | 27 | 61.25 | 37.75 |
| 6 | 30 | 61.75 | 37.25 |
| 7 | 33.5 | 62.25 | 36.75 |
| 8 | 37 | 63.25 | 36.25 |
| 9 | 41 | 64 | 35.75 |
| PW | 45 | 64.5 | 35.5 |
| SW | 55 | 65 | 35 |
| DW | 50 | 65 | 35.25 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Cleveland CG4
The CG4 is a mid-size cavity-back aimed at the better player, and the model that established the CG naming that ran through the CG7 and CG16. It is cast from Cleveland's CMM alloy, which the company described as carrying substantially more carbon than ordinary stainless for vibration absorption while being around ten percent less dense, freeing roughly 25 grams to be redistributed low in the head. Lofts are traditional for the period, with a 33.5-degree 7-iron and a 45-degree pitching wedge — the same loft ladder Cleveland carried forward into the CG7. The stock set ran 3-iron through pitching wedge, with a 50-degree DW and a 55-degree SW available to extend it. The numbers below are the standard men's steel-shaft specification.
Related models
- Successor: Cleveland CG7
- Later better-player Cleveland iron: CG7 Tour
- Compare: Cleveland CG4 vs Cleveland CG7
- Compare: Cleveland CG4 vs Cleveland CG7 Tour
Frequently asked questions
What is the loft of a Cleveland CG4 7-iron?
The Cleveland CG4 7-iron has a loft of 33.5 degrees, with a 62.25-degree lie and a 36.75-inch steel-shaft length.
What is the pitching wedge loft on the Cleveland CG4?
The CG4 pitching wedge is 45 degrees, roughly 2 degrees weaker than the game-improvement pitching wedges of the same era and 1 degree weaker than a modern set.
How do the Cleveland CG4 lofts compare to the CG7?
They are the same through the set. Both run a 33.5-degree 7-iron and a 45-degree pitching wedge; the CG4 uses slightly flatter lie angles in the mid irons.
Finding a used set
The Cleveland CG4 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TheSandTrap.com forum thread 'Cleveland CG4 loft question' (https://thesandtrap.com/forums/topic/41653-cleveland-cg4-loft-question/) — carries a posted CG4 loft/lie table covering 1-iron through SW, which is the source of every loft and lie above. This is a secondary, user-posted table, not a Cleveland spec sheet.
- GolfRoots used-club listing 'Cleveland CG4 6 Iron S Flex 37.25"' (https://golfroots.com/products/cl-70091) — a stock-length CG4 6-iron measured at 37.25 inches, which matches the length ladder used here.
- HONEST SOURCING NOTE: no Cleveland manufacturer spec page for the CG4 survives in the Wayback Machine — the archived clevelandgolf.com product pages begin with the 2009 site, by which time the CG4 had been replaced. The lengths above other than the 6-iron are the standard Cleveland iron length ladder of that era (identical to the CG7's published steel lengths) rather than figures read from a CG4 document. Offset, bounce and swing weight are omitted because no reliable figures were found. Corrections welcome.
Last reviewed 2026-07-22. Spot an error? [email protected]