Cleveland CG7 Irons Specifications

Full factory loft, lie and length chart for the Cleveland CG7 irons, 2009–2010.

Years produced: 2009–2010
Category: Game Improvement Irons
Construction: —
Material: —
Set makeup: 3–DW

Loft, lie & length chart

Standard men's steel-shaft specifications for the Cleveland CG7 irons.
Club	Loft (°)	Lie (°)	Length (in)	Offset (in)	Swing wt
3	21	60	38.75	0.24	D2
4	24	60.5	38.25	0.21	D2
5	27	61	37.75	0.18	D2
6	30	61.5	37.25	0.16	D2
7	33.5	62.5	36.75	0.14	D2
8	37	63	36.25	0.12	D2
9	41	64	35.75	0.105	D2
PW	45	64.5	35.5	0.09	D2
SW	55	65	35	0.06	D4
DW	50	65	35.25	0.075	D3

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the Cleveland CG7

The CG7 is the standard, larger-headed member of Cleveland's CG7 family, sold alongside the more compact CG7 Tour. It uses 360-degree Gelback Technology — a one-piece injection-moulded insert that damps vibration across the whole face — together with Dynamic Microcavity Technology, in which the microcavities shorten progressively from the long irons to the short irons to place the centre of gravity correctly in each head, and heel/toe muscle weighting that Cleveland rated at 6 percent higher MOI than a traditional iron. Lofts are traditional rather than strengthened, with a 33.5-degree 7-iron and a 45-degree pitching wedge, and offset is far heavier than on the CG7 Tour at 0.140 inches in the 7-iron against the Tour's 0.115. The stock set ran 3-iron through pitching wedge with a 50-degree DW and a 55-degree SW extending it, and a Black Pearl finish was offered alongside the standard chrome. Specs below are the standard men's steel-shaft numbers from Cleveland's own product page.

Stock shafts

Cleveland Golf CG7 Graphite — graphite · 75-83g · flexes: A, R, S
True Temper Dynamic Gold — steel · 127-130g · flexes: R300, S300, X100

Related models

Frequently asked questions

What is the loft of a Cleveland CG7 7-iron?

The Cleveland CG7 7-iron has a loft of 33.5 degrees, a lie of 62.5 degrees and a steel-shaft length of 36.75 inches.

What is the pitching wedge loft of the Cleveland CG7 irons?

The CG7 pitching wedge is 45 degrees, with a 64.5-degree lie and a 35.5-inch steel length. The set extends to a 50-degree DW and a 55-degree SW.

What is the difference between the CG7 and the CG7 Tour?

The standard CG7 is the larger, more forgiving head with much more offset — 0.140 inches at the 7-iron against 0.115 on the Tour — while the CG7 Tour is a compact players head with a Tour sole. The CG7 Tour is also 1.5 degrees stronger through the mid irons, at 34 degrees in the 7-iron versus 33.5.

Finding a used set

The Cleveland CG7 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:

Cleveland Golf official CG7 IRONS product page, archived 2009-01-26 via web.archive.org (http://web.archive.org/web/20090126094816/http://clevelandgolf.com/cg7-irons__cg7_irons__viewProd_irons.html) — full IRON / LOFT / LIE / LENGTH (steel and graphite) / SWING WEIGHT / OFFSET VALUE table for 3-iron through SW, plus the CG7 Graphite and True Temper Dynamic Gold stock shaft tables.
Same archived page for the technology description (360-degree Gelback insert, Dynamic Microcavity Technology, heel/toe muscle weighting, 6 percent MOI claim).
Note: that archived table prints the 3-iron steel length as 38.74 inches, which is inconsistent with the rest of the ladder and with the graphite column; it is recorded here as 38.75 inches.

Last reviewed 2026-07-22. Spot an error? [email protected]