Cobra King Cobra Oversize Irons Specifications
Full factory loft, lie and length chart for the Cobra King Cobra Oversize irons, 1994–1996.
- Years produced
- 1994–1996
- Category
- Game Improvement Irons
- Construction
- investment cast oversize cavity back
- Material
- stainless steel
- Set makeup
- 2–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Swing wt |
|---|---|---|---|---|
| 2 | 17 | 60 | 39.5 | D1 |
| 3 | 20 | 60.5 | 39 | D1 |
| 4 | 23 | 61 | 38.5 | D1 |
| 5 | 26 | 61 | 38 | D1 |
| 6 | 29 | 61.5 | 37.5 | D1 |
| 7 | 32 | 62 | 37 | D1 |
| 8 | 35 | 62 | 36.5 | D1 |
| 9 | 39 | 63 | 36 | D1 |
| PW | 43 | 63 | 36 | D1 |
| GW | 50 | 63 | 35.75 | D1 |
| SW | 56 | 63 | 35.75 | D1 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Cobra King Cobra Oversize
The original King Cobra Oversize of 1994 was one of the irons that defined the oversize era, backed by Greg Norman and a major commercial success for the then-independent Cobra Golf. The investment-cast stainless head enlarged the hitting area well beyond the era's standard irons while keeping traditional lofts — 32 degrees at the 7-iron and 43 at the pitching wedge — on a set that ran from a 17-degree D1 driving iron (listed below as the 2-iron) through gap and sand wedges, all built to a light D1 swing weight. It was sold through 1995 and followed by the King Cobra II in 1996; Cobra revived the oversize concept in 2016 with the KING OS.
Stock shafts
- True Temper Dynamic Gold — steel
- King Cobra Autoclave — graphite
Related models
- Later Cobra oversize iron: King Cobra SS Oversize
- 2016 revival of the concept: Cobra KING OS
- Compare: Cobra King Cobra Oversize vs Cobra King Cobra SS Oversize
- Compare: Cobra King Cobra Oversize vs Cobra KING OS
Frequently asked questions
What is the loft of a King Cobra Oversize 7-iron?
The 1994 King Cobra Oversize 7-iron has a loft of 32 degrees, a lie of 62 degrees and a length of 37 inches.
What clubs were available in the King Cobra Oversize set?
The line ran from a 17-degree D1 driving iron through the 9-iron, plus a 43-degree pitching wedge, 50-degree gap wedge and 56-degree sand wedge, all at a D1 swing weight.
Why were the King Cobra Oversize irons significant?
Launched in 1994 with Greg Norman's backing, they were among the first hugely successful oversize irons, enlarging the face for forgiveness while keeping traditional lofts, and they established the oversize line Cobra continued with the King Cobra II and SS Oversize.
Finding a used set
The Cobra King Cobra Oversize ran from 1994 to 1996 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Equip2Golf King Cobra I Oversize specification page (equip2golf.com/specifications/cobra/King_cobra_I_oversize.html) — full loft/lie/length/swing-weight table for the D1 driving iron through sand wedge, dated 1994-1995, with the Dynamic Gold steel and King Cobra Autoclave graphite stock shafts
- GolfClubSpec.com King Cobra I Oversize entry (golfclubspec.com/iron_results.php?id=51) — same table, year 1994. HONEST SOURCING NOTE: GolfClubSpec and Equip2Golf are the same publisher, so these are effectively one source family compiled from period brochures; no offset figures were published, and confidence is medium accordingly. The 17-degree club is Cobra's D1 driving iron, recorded here in the 2-iron slot.
Last reviewed 2026-07-29. Spot an error? [email protected]