Cobra King MIM Tour Irons Specifications
Full factory loft, lie and length chart for the Cobra King MIM Tour irons, 2021–2023.
- Years produced
- 2021–2023
- Category
- Players Irons
- Construction
- metal injection moulded one-piece head
- Material
- 304 stainless steel, metal injection moulded
- Set makeup
- 3–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 20 | 60.5 | 39.5 | 0.15 | D2 |
| 4 | 23 | 61 | 39 | 0.134 | D2 |
| 5 | 26 | 61.5 | 38.5 | 0.122 | D2 |
| 6 | 29 | 62 | 38 | 0.114 | D2 |
| 7 | 33 | 62.5 | 37.5 | 0.098 | D2 |
| 8 | 37 | 63 | 37 | 0.091 | D2 |
| 9 | 41 | 63.5 | 36.5 | 0.083 | D2 |
| PW | 45 | 64 | 36.25 | 0.075 | D3 |
| GW | 50 | 64 | 36 | 0.075 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Cobra King MIM Tour
The King MIM Tour is one of the few production irons made by metal injection moulding rather than forging or investment casting — the head is formed from powdered stainless under pressure, which Cobra used to hold tighter tolerances than a cast head allows. The set is built long for a players iron, at 39.5 inches for the 3-iron and 37.5 for the 7, with traditional lofts and a 33-degree 7-iron.
Stock shafts
- FST KBS $-Taper — steel
Related models
- Cobra's players-distance iron of the period: Cobra King Forged Tec
- Compare: Cobra King MIM Tour vs Cobra KING Forged CB
- Compare: Cobra King MIM Tour vs Cobra KING Forged Tec (2022)
- Compare: Cobra King MIM Tour vs Cobra King Tour
- Compare: Cobra King MIM Tour vs Cobra KING Forged Tec
Frequently asked questions
What is the loft of a Cobra King MIM Tour 7-iron?
The Cobra King MIM Tour 7-iron has a loft of 33 degrees, a lie of 62.5 degrees and a length of 37.5 inches.
What does MIM mean on a Cobra iron?
Metal injection moulding — the head is formed from powdered stainless steel under pressure rather than forged or cast. Cobra used it to hold tighter shape tolerances.
When were Cobra King MIM Tour irons made?
In 2021. Cobra replaced them with the forged King Tour, which reached retail in February 2023.
Finding a used set
The Cobra King MIM Tour ran from 2021 to 2023 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2nd Swing Golf specification table for the Cobra KING MIM Tour iron set (https://www.2ndswing.com/golf-clubs/iron-sets/cobra-king-mim-tour-iron-set) — supplied every loft, lie, length, offset and swing weight above and the KBS $-Taper stock shaft.
- Note on offset: the source publishes offset in millimetres (3.8 mm down to 1.9 mm), converted to inches here.
- todays-golfer.com 'Cobra King Tour, CB and MB Irons (2023) Review' — identifies the KING MIM Tour as the predecessor of the 2023 King Tour and dates it to 2021, which is the year recorded here.
- Note: bounce is omitted — the source table did not carry a bounce column. Confidence is medium; the 2021 date comes from a review's reference to the model rather than a Cobra press release.
- Conflicting date: mygolfspy.com 'Cobra KING Tour Irons' and todays-golfer.com 'Cobra King Tour Irons Review' both place the launch of the MIM iron in 2020, and retailers list it as a 2020 model. The year above follows the 2023-review dating; treat it as uncertain to within a year.
Last reviewed 2026-07-28. Spot an error? [email protected]