MacGregor V-FOIL 1025M vs MacGregor MT PRO-M
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | V-FOIL 1025M loft | MT PRO-M loft | V-FOIL 1025M lie | MT PRO-M lie | V-FOIL 1025M length | MT PRO-M length |
|---|---|---|---|---|---|---|
| 2 | 19 | — | 59 | — | 39.5 | — |
| 3 | 22 | 21 | 60 | 60 | 39 | 39 |
| 4 | 25 | 24 | 61 | 61 | 38.5 | 38.5 |
| 5 | 28 | 27 | 61.5 | 61.5 | 38 | 38 |
| 6 | 31.5 | 31 | 62 | 62 | 37.5 | 37.5 |
| 7 | 35 | 35 | 62.5 | 62.5 | 37 | 37 |
| 8 | 39 | 39 | 63 | 63 | 36.5 | 36.5 |
| 9 | 43 | 43 | 63.5 | 63.5 | 36 | 36 |
| PW | 48 | 47 | 64 | 64 | 35.5 | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- V-FOIL 1025M
- MT PRO-M
What the differences mean
At the 7-iron, the V-FOIL 1025M is 35° and the MT PRO-M is 35°, identical at the club most golfers compare on, although other clubs in the sets differ. Across the 8 clubs both sets share, the MT PRO-M averages 0.6° stronger, with the largest gap at the 3-iron (22° vs 21°). The pitching wedges are 48° and 47°; the stronger one leaves a 3° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the V-FOIL 1025M runs 2-iron to PW (9 clubs), the MT PRO-M 3-iron to PW (8 clubs).
Both are blade irons, built for low single-digit handicaps who strike the ball consistently. Compact muscleback irons with minimal offset, thin toplines and the smallest sweet spot — built for shot-shaping over forgiveness. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The V-FOIL 1025M is listed as forged V-FOIL muscleback and the MT PRO-M as forged muscleback, CNC-milled triangular muscle and face. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
There are 7 years between these sets (2001 and 2008), more than one design generation. Over that time irons moved toward stronger lofts, thinner and faster faces, hollow and multi-material heads and wider use of tungsten, so the newer set is not simply a better version of the older one: it may launch and spin quite differently.
Which should you choose?
The MT PRO-M is the stronger-lofted set — up to 1° stronger than the V-FOIL 1025M on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: MacGregor V-FOIL 1025M specs and MacGregor MT PRO-M specs.
Frequently asked questions
Is the MacGregor V-FOIL 1025M stronger lofted than the MT PRO-M?
Not at the 7-iron, where both are 35°. Other clubs in the sets differ, so compare the full table above.
What is the loft difference between the MacGregor V-FOIL 1025M and MT PRO-M?
At the 7-iron the difference is 0° (35° vs 35°). The largest gap on a shared club is 1° at the 3-iron, and 5 of the 8 shared clubs differ.
Are the MacGregor V-FOIL 1025M and MT PRO-M aimed at the same golfer?
Yes. Both are blade irons, built for low single-digit handicaps who strike the ball consistently. Choose on feel, looks and gapping, ideally after hitting both.
Do the MacGregor V-FOIL 1025M and MT PRO-M have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop MacGregor V-FOIL 1025M
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.