Titleist DCI 990 vs Titleist DCI 762
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | DCI 990 loft | DCI 762 loft | DCI 990 lie | DCI 762 lie | DCI 990 length | DCI 762 length |
|---|---|---|---|---|---|---|
| 1 | 17 | 17 | 58 | 58 | 39.75 | 40 |
| 2 | 19 | 19 | 59 | 59 | 39.25 | 39.5 |
| 3 | 22 | 21.5 | 60 | 60 | 38.75 | 39 |
| 4 | 25 | 24 | 61 | 61 | 38.25 | 38.5 |
| 5 | 28 | 27 | 62 | 62 | 37.75 | 38 |
| 6 | 32 | 30 | 62.5 | 62.5 | 37.25 | 37.5 |
| 7 | 36 | 34 | 63 | 63 | 36.75 | 37 |
| 8 | 40 | 38 | 63.5 | 64 | 36.25 | 36.5 |
| 9 | 44.5 | 42 | 64 | 64 | 35.75 | 36 |
| PW | 49 | 46 | 64 | 64 | 35.5 | 35.75 |
| W | — | 50 | — | 64 | — | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- DCI 990
- DCI 762
What the differences mean
At the 7-iron, the DCI 990 is 36° and the DCI 762 is 34°, a 2° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the DCI 762 should carry roughly 6 to 8 yards further with that club, on a slightly lower, shallower flight than the DCI 990. Across the 10 clubs both sets share, the DCI 762 averages 1.4° stronger, with the largest gap at the PW (49° vs 46°). The pitching wedges are 49° and 46°; the stronger one leaves a 4° jump to a 50° gap wedge, which matters when planning wedge gapping. Beyond loft, the DCI 762 7-iron is 0.25 inches longer (36.75" vs 37").
The sets are built differently: the DCI 990 runs 1-iron to PW (10 clubs), the DCI 762 1-iron to W (11 clubs).
The DCI 990 is a players iron and the DCI 762 a game improvement iron, so they sit 2 steps apart on the forgiveness scale. The DCI 762 is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 10 to 25 handicaps. The DCI 990 trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.
The DCI 990 is listed as investment cast and the DCI 762 as investment cast, dual cavity. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
The DCI 762 arrived 2 years after the DCI 990, a typical one-generation refresh. Changes over that span are usually incremental: refined face thickness, revised weighting, updated looks and small loft tweaks rather than a new concept. Here the 7-iron loft moved from 36° to 34°.
Which should you choose?
The DCI 762 is the stronger-lofted set — up to 3° stronger than the DCI 990 on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Titleist DCI 990 specs and Titleist DCI 762 specs.
Frequently asked questions
Is the Titleist DCI 990 stronger lofted than the DCI 762?
No. The DCI 762 is the stronger-lofted set: its 7-iron is 34° against 36° for the Titleist DCI 990, 2° stronger and worth roughly 6 to 8 yards of extra carry.
What is the loft difference between the Titleist DCI 990 and DCI 762?
At the 7-iron the difference is 2° (36° vs 34°). The largest gap on a shared club is 3° at the PW, and 8 of the 10 shared clubs differ.
Which is better for higher handicap golfers, the Titleist DCI 990 or the DCI 762?
The DCI 762. As a game improvement iron it is the more forgiving design, suited to roughly 10 to 25 handicaps. The Titleist DCI 990 is a players iron, better suited to roughly scratch to 10 handicaps.
Do the Titleist DCI 990 and DCI 762 have the same lie and length?
Not exactly. At the 7-iron the Titleist DCI 990 is 63° lie and 36.75 inches, the DCI 762 63° and 37 inches. Both can be bent or built to your own fit.
Shop Titleist DCI 990
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.