Titleist DCI 762 Irons Specifications
Full factory loft, lie and length chart for the Titleist DCI 762 irons, 2001–2003.
- Years produced
- 2001–2003
- Category
- Game Improvement Irons
- Construction
- investment cast, dual cavity
- Material
- 17-4 stainless steel
- Set makeup
- 1–W
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 1 | 17 | 58 | 40 | 0.18 | 1 | D2 |
| 2 | 19 | 59 | 39.5 | 0.171 | 1 | D2 |
| 3 | 21.5 | 60 | 39 | 0.158 | 1 | D2 |
| 4 | 24 | 61 | 38.5 | 0.144 | 2 | D2 |
| 5 | 27 | 62 | 38 | 0.132 | 4 | D2 |
| 6 | 30 | 62.5 | 37.5 | 0.119 | 5 | D2 |
| 7 | 34 | 63 | 37 | 0.109 | 6 | D2 |
| 8 | 38 | 64 | 36.5 | 0.103 | 7 | D2 |
| 9 | 42 | 64 | 36 | 0.1 | 8 | D2 |
| PW | 46 | 64 | 35.75 | 0.099 | 9 | D2 |
| W | 50 | 64 | 35.5 | 0.099 | 9 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Titleist DCI 762
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Titleist DCI 762
The DCI 762 is the 2001 dual-cavity iron that replaced the DCI 990 at the game-improvement end of the Titleist range. It is investment cast in 17-4 stainless with a dual-cavity back that pushes weight low and to the perimeter, and it runs noticeably stronger than the 990 it replaced: the 7-iron is 34 degrees against 36, and the set carries a half-degree 3-iron loft of 21.5 degrees. Offset tapers from .180 inches at the 1-iron to .099 inches at the gap wedge, and every club is built to D2 swing weight.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
Frequently asked questions
What is the loft of a Titleist DCI 762 7-iron?
The Titleist DCI 762 7-iron is 34 degrees, with a 63 degree lie and a 37 inch standard steel length.
How do the DCI 762 lofts compare with the DCI 990?
The DCI 762 is two degrees stronger through the middle of the set: its 7-iron is 34 degrees against 36 degrees on the DCI 990, and its pitching wedge is 46 degrees against 49.
What is the pitching wedge loft on the Titleist DCI 762?
The DCI 762 pitching wedge is 46 degrees, and the matching gap wedge, badged W, is 50 degrees.
Finding a used set
The Titleist DCI 762 ran from 2001 to 2003 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist previous-models archived product page, titleist.com/golf-clubs/irons/dci-762, via the Internet Archive (full manufacturer table: length, loft, lie, offset, swing weight, bounce)
- Lineage: the DCI 762 (2001) replaced the DCI 990 (1999) as the flagship of the DCI family, and also absorbed the slot of the DCI 981. Nothing succeeded it - Titleist ended the DCI line in 2003 and moved to the forged 690 and 704 families - so successor is null.
Last updated 22 July 2026. Spot an error? info@loftchart.com