Titleist DCI 990 Irons Specifications
Full factory loft, lie and length chart for the Titleist DCI 990 irons, 1999–2001.
- Years produced
- 1999–2001
- Category
- Players Irons
- Construction
- investment cast
- Material
- 431 stainless steel
- Set makeup
- 1–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 1 | 17 | 58 | 39.75 | 0.179 | D2 |
| 2 | 19 | 59 | 39.25 | 0.165 | D2 |
| 3 | 22 | 60 | 38.75 | 0.151 | D2 |
| 4 | 25 | 61 | 38.25 | 0.14 | D2 |
| 5 | 28 | 62 | 37.75 | 0.126 | D2 |
| 6 | 32 | 62.5 | 37.25 | 0.113 | D2 |
| 7 | 36 | 63 | 36.75 | 0.103 | D2 |
| 8 | 40 | 63.5 | 36.25 | 0.096 | D2 |
| 9 | 44.5 | 64 | 35.75 | 0.093 | D2 |
| PW | 49 | 64 | 35.5 | 0.092 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Titleist DCI 990
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Titleist DCI 990
The DCI 990 was the better-player model in Titleist's Dynamic Cavity Iron family at the turn of the 2000s. It used a progressive cavity that shifted from a deeper long-iron cavity toward a more muscleback-like short iron, paired with a shallow profile, thin topline and minimal progressive offset. Lofts are traditional by modern standards, with a 36 degree 7-iron and a 49 degree pitching wedge. A slightly larger DCI 990B variant was offered alongside it.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
Frequently asked questions
What is the loft of a Titleist DCI 990 7-iron?
The Titleist DCI 990 7-iron has a loft of 36 degrees, with a 63 degree lie and a 36.75 inch standard steel length.
What is the pitching wedge loft on the Titleist DCI 990?
The DCI 990 pitching wedge is 49 degrees, which is roughly 3 to 4 degrees weaker than most modern players' irons.
What are the Titleist DCI 990 irons made of?
They are investment cast from 431 stainless steel with a progressive cavity design.
Finding a used set
The Titleist DCI 990 ran from 1999 to 2001 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- equip2golf.com archived Titleist DCI 990 specification sheet (loft, lie, length, offset, swingweight)
- golfclubspec.com iron specification database, entry 117 (Titleist DCI 990) - corroborates loft/lie/length
- equip2golf.com Titleist DCI 990 iron review - 431 stainless steel construction, Dynamic Gold stock shaft
- year_discontinued set to 2001, the announcement year of the DCI 762 that replaced it, per this database's convention; the 990 remained on shelves into 2002
Last updated 22 July 2026. Spot an error? info@loftchart.com