Epon AF-705 Irons Specifications
Full factory loft, lie and length chart for the Epon AF-705 irons, 2017–2020.
- Years produced
- 2017–2020
- Category
- Game Improvement Irons
- Construction
- forged one-piece pocket cavity (S20C billet, undercut cavity)
- Material
- S20C soft carbon steel
- Set makeup
- 5–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 5 | 23 | 61 | 38 | 0.197 |
| 6 | 26 | 61.5 | 37.5 | 0.185 |
| 7 | 29 | 62 | 37 | 0.169 |
| 8 | 33 | 62.5 | 36.5 | 0.157 |
| 9 | 38 | 63 | 36 | 0.146 |
| PW | 43 | 63.5 | 35.5 | 0.134 |
| AW | 49 | 63.5 | 35.25 | 0.122 |
| SW | 56 | 63.5 | 35.25 | 0.102 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Epon AF-705
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Epon AF-705
The AF-705 is a game-improvement iron in Epon's numbered "AF-7xx" distance line, forged from an S20C billet with an undercut pocket cavity and progressively larger offset than Epon's players and players-distance models to add forgiveness and easier launch. It predates the AF-706 that followed it - Epon's own AF-706 launch material describes the AF-706 as the brand's first hollow-construction iron, which means the AF-705 itself is a conventional one-piece forging rather than a hollow-body design. Ginone Golf's custom-order catalogue places the AF-705 in its 2017 product year. Heads are built to order with no fixed stock shaft; lengths below are the standard steel assembly lengths from the Japanese retail spec chart, and offsets are converted from the published gooseneck figures in millimetres. A 56-degree SW head extends the stock 5-PW set to fill the gap to the sand wedge, matching the wedge-extension pattern Epon carried into the AF-706.
Related models
Frequently asked questions
What is the loft of an Epon AF-705 7-iron?
The Epon AF-705 7-iron has a loft of 29 degrees, a lie of 62 degrees, and a standard steel length of 37 inches.
Is the Epon AF-705 a hollow iron?
No. It is a conventional one-piece forged pocket-cavity iron. Epon's own material for the later AF-706 identifies that model, not the AF-705, as the brand's first hollow-construction iron.
What wedges match the Epon AF-705 set?
Because the pitching wedge is 43 degrees, Epon offered a 49-degree AW and a 56-degree SW in the same head style to complete the set down to the sand wedge.
Finding a used set
The Epon AF-705 ran from 2017 to 2020 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- g-one-golf.com Epon AF-705 custom order page (2017 catalogue, /products/maker_epon/2017/iron/af705/af705iron.html) - full spec table: lofts 23/26/29/33/38/43 plus 49/56 wedges, lies 61-63.5, gooseneck 5.0 down to 2.6 mm, head weights 254.5-293.5 g, standard steel assembly lengths 38 to 35.25 inches, S20C forged construction with nickel plating
- g-one-golf.com 'アイアンデータ比較表 (ロフト)' (data/ironloft.html) - dates the AF-705 to its 2017 product year and lists the identical 23/26/29/33/38/43/49/56 loft ladder
- epongolf.co.jp news release 'EPON AF-706Sアイアンを新発売' (2022.01.22) and the AF-706 model's own record - Epon's copy for the AF-706 describes it as the brand's first hollow-construction iron, establishing that the numerically prior AF-705 is a conventional one-piece forging rather than hollow
- Status check, 29 September 2026: year_discontinued is 2020. The AF-706 was launched in May 2020 as the follow-up to the AF-705 (golfwrx.com).
Last updated 29 September 2026. Spot an error? info@loftchart.com