Epon AF-Tour CB Irons Specifications
Full factory loft, lie and length chart for the Epon AF-Tour CB irons, 2015–2023.
- Years produced
- 2015–2023
- Category
- Players Irons
- Construction
- forged one-piece half-cavity (S20C billet)
- Material
- S20C soft carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 3 | 21 | 60 | 38.5 |
| 4 | 24 | 60.5 | 38 |
| 5 | 27 | 61 | 37.5 |
| 6 | 30 | 61.5 | 37 |
| 7 | 34 | 62 | 36.5 |
| 8 | 38 | 62.5 | 36 |
| 9 | 42 | 63 | 35.5 |
| PW | 46 | 63.5 | 35 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Epon AF-Tour CB
The AF-Tour CB is a forged half-cavity players iron from Epon's Tour line, built as a more forgiving companion to the muscle-back AF-Tour - sharing a similar loft ladder but carrying more offset - from a single S20C billet with a nickel-chrome plated finish. A workshop blog post dated 18 February 2015 covers a completed AF-Tour CB fitting, and Ginone Golf's custom-order catalogue files the model under its 2015 product year, which is earlier than some later marketplace descriptions imply. The AF-Tour CB2 succeeded it, appearing in Ginone Golf's 2023 product year. Heads are built to order with no fixed stock shaft; lengths below are the standard steel assembly lengths from the Japanese retail spec chart. Epon's gooseneck/offset figures for this model were not found in an accessible source, so the offset key is omitted here rather than estimated.
Related models
Frequently asked questions
What is the loft of an Epon AF-Tour CB 7-iron?
The Epon AF-Tour CB 7-iron has a loft of 34 degrees, a lie of 62 degrees, and a standard steel length of 36.5 inches.
How does the AF-Tour CB differ from the Epon AF-Tour?
The AF-Tour CB is a half-cavity version of the muscle-back AF-Tour, sharing a similar loft ladder but built with more offset for extra forgiveness.
When was the Epon AF-Tour CB released?
Around February 2015 - a workshop blog documented a completed custom build that month, and Ginone Golf's catalogue files the model under its 2015 product year.
Finding a used set
The Epon AF-Tour CB ran from 2015 to 2023 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- g-one-golf.com Epon AF-Tour CB custom order page (2015 catalogue, /products/maker_epon/2015/iron/aftourcb/aftourcbiron.html) - full spec table: lofts 21/24/27/30/34/38/42/46, lies 60-63.5, standard steel assembly lengths 38.5 to 35.0 inches, S20C soft iron forged construction with nickel-chrome plated finish; the page did not publish gooseneck/offset figures
- g-one-golf.com 'アイアンデータ比較表 (ロフト)' (data/ironloft.html) - dates the AF-Tour CB to its 2015 product year and lists the identical 21/24/27/30/34/38/42/46 loft ladder, and separately dates the AF-Tour CB2 to 2023, used for year_discontinued
- topgolf-factory.com 'EPON AF-TOUR CB 試打クラブ完成' (2015-02-18) - a completed custom fitting/build of the AF-Tour CB dated February 2015, corroborating the model's 2015 introduction
- one2one.jp Epon AF-Tour CB product page and related Japanese custom-club retailer copy - describe the AF-Tour CB as a forged half-cavity iron made from a single S20C billet, a more forgiving companion to the AF-Tour muscle back with a similar loft ladder but more offset
Last reviewed 2026-07-29. Spot an error? [email protected]