Honma TW727 Vn Irons Specifications
Full factory loft, lie and length chart for the Honma TW727 Vn irons, 2015–2016.
- Years produced
- 2015–2016
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- mild steel (S25C), forged, half-mirror and mirror finish with double-layer plating
- Set makeup
- 3–10
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.157 | D2 |
| 4 | 24 | 60 | 38.25 | 0.157 | D2 |
| 5 | 27 | 60.5 | 37.75 | 0.165 | D2 |
| 6 | 30 | 61 | 37.25 | 0.185 | D2 |
| 7 | 34 | 61.5 | 36.75 | 0.185 | D2 |
| 8 | 38 | 62 | 36.25 | 0.185 | D2 |
| 9 | 42 | 62.5 | 35.75 | 0.193 | D2 |
| 10 | 46 | 63 | 35.25 | 0.193 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW727 Vn
The Vn is Honma's "half-cavity" iron in the January 2015 Tour World 727 range: a compact, muscle-back-feeling head forged from S25C mild steel, one step more forgiving than the true-blade TW727 M but sharing that model's lofts, and marketed as a blade alternative for tour staff. Lofts are one step weaker than the cavity-back V (34-degree 7-iron versus 32) with a correspondingly smaller, more compact profile. The set runs 3 through 10 — Honma numbers the pitching wedge as the 10-iron at 46 degrees. Lengths below are the Dynamic Gold S200 steel build; Vizard IB95 graphite builds ran 0.375 inch longer. Lofts, lies and lengths carried over unchanged into the TW737 Vn released the following year.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: S200
- Honma Vizard IB95 — graphite · flexes: S
Related models
- Same generation, more forgiving cavity-back head: Honma TW727 V
- Same generation, pocket-cavity distance head: Honma TW727 P
- Successor: Honma TW737 Vn
- Compare: Honma TW727 Vn vs Honma TW727 P
- Compare: Honma TW727 Vn vs Honma TW727 V
Frequently asked questions
What is the loft of a Honma TW727 Vn 7-iron?
The Honma TW727 Vn 7-iron has a loft of 34 degrees, a lie of 61.5 degrees and a Dynamic Gold steel length of 36.75 inches.
What does the 'n' mean in Honma TW727 Vn?
It marks the near-blade, half-cavity head of the TW727 range: Honma built it to share its lofts with the true-blade TW727 M while adding a touch of cavity-back forgiveness, and marketed it as a blade alternative for its tour staff.
How does the Honma TW727 Vn compare to the TW727 V?
Both are forged from S25C mild steel with the same 3-10 set makeup, but the Vn has weaker lofts (34-degree 7-iron versus the V's 32) and a smaller, more compact head aimed at better players who want a blade-like look and feel.
Finding a used set
The Honma TW727 Vn ran from 2015 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- golfnavi.info spec database, 'TW727 Vn アイアン' (golfnavi.info/spec/11828) — full loft/lie/face-progression/length table sourced from Honma's Japan-market official spec sheet, data recorded 5 Dec 2014 ahead of the January 2015 launch: lofts 21/24/27/30/34/38/42/46, lies 59.5-63, face progression (offset) 4.0/4.0/4.2/4.7/4.7/4.7/4.9/4.9 mm (converted to inches here), Dynamic Gold S200 lengths 38.75 down to 35.25 inches, D2 swing weight throughout, forged S25C mild-steel head with half-mirror/mirror double-layer plating, 3-10 set, and the Vizard IB95 / Dynamic Gold stock shaft pair. Manufacturer description quoted on the page reads 'マッスル感覚のハーフキャビティアイアン' (a half-cavity iron with a muscle-back feel). The page's comparison table confirms the TW737 Vn that followed in 2016 carried the identical 21-46 loft range, 59.5-63 lie range and 38.75/35.25-inch length span.
- golfpunkhq.com 'The Honma TW727 Iron Range' and teetimes.info's mirror of the same article — describe the Vn as a 'compact head blade alternative' with 'identical lofts to the M' true-blade model, most popular among Honma's tour staff, positioned between the TW727 M blade and the TW727 V cavity back.
- thehackersparadise.com's review of the TW737 Vn (successor) independently corroborates that the Vn head carries the weakest (highest-degree) lofts of its generation's V-family, consistent with the 34-degree 7-iron recorded here.
- Note on category: classified 'blade' here (rather than 'players') because the manufacturer markets it as a blade alternative with lofts identical to the true-blade M, per golfpunkhq/teetimes.info, even though golfnavi.info's own head-shape field labels it a compact cavity.
- Note on year_discontinued: set to 2016, the year Honma announced the TW737 Vn; this generation is thinly documented in English-language sources, so confidence is medium.
Last reviewed 2026-07-29. Spot an error? [email protected]