Honma TW727 V Irons Specifications
Full factory loft, lie and length chart for the Honma TW727 V irons, 2015–2016.
- Years produced
- 2015–2016
- Category
- Players Irons
- Construction
- forged
- Material
- mild steel (S25C), forged, half-mirror and mirror finish with double-layer plating
- Set makeup
- 3–10
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 20 | 59.5 | 38.75 | 0.138 | D2 |
| 4 | 22 | 60 | 38.25 | 0.138 | D2 |
| 5 | 25 | 60.5 | 37.75 | 0.146 | D2 |
| 6 | 28 | 61 | 37.25 | 0.165 | D2 |
| 7 | 32 | 61.5 | 36.75 | 0.165 | D2 |
| 8 | 36 | 62 | 36.25 | 0.165 | D2 |
| 9 | 41 | 62.5 | 35.75 | 0.173 | D2 |
| 10 | 46 | 63 | 35.25 | 0.173 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW727 V
The V is the cavity-back players iron of Honma's January 2015 Tour World 727 range, forged from S25C mild steel and marketed as combining distance with workability. Lofts and lie angles carried over essentially unchanged into the TW737 V released the following year (32-degree 7-iron in both). The set runs 3 through 10 — Honma numbers the pitching wedge as the 10-iron at 46 degrees. Lengths below are the N.S. Pro Modus3 Tour 120 steel build; Vizard IB95 graphite builds ran 0.375 inch longer.
Stock shafts
- Nippon N.S. Pro Modus3 Tour 120 — steel · flexes: S
- Honma Vizard IB95 — graphite · flexes: S
Related models
- Same generation, more compact near-blade head: Honma TW727 Vn
- Same generation, pocket-cavity distance head: Honma TW727 P
- Successor: Honma TW737 V
- Compare: Honma TW727 V vs Honma TW727 P
- Compare: Honma TW727 V vs Honma TW727 Vn
Frequently asked questions
What is the loft of a Honma TW727 V 7-iron?
The Honma TW727 V 7-iron has a loft of 32 degrees, a lie of 61.5 degrees and an N.S. Pro Modus3 Tour 120 steel length of 36.75 inches.
What is the difference between the Honma TW727 V and TW727 Vn?
The V has a wider sole and deeper cavity with stronger lofts (32-degree 7-iron) for more forgiveness and distance, while the Vn is a more compact, muscle-back-feeling half-cavity with weaker lofts (34-degree 7-iron) aimed at better players who want a blade-like look.
How does the Honma TW727 V compare to the TW737 V that replaced it?
The two share essentially the same specification: identical 20-to-46-degree loft range, the same 59.5-to-63-degree lie progression and the same forged S25C mild-steel construction. The TW737 V that followed in 2016 is a close continuation of the same head rather than a redesign.
Finding a used set
The Honma TW727 V ran from 2015 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- golfnavi.info spec database, 'TW727 V アイアン' (golfnavi.info/spec/11829) — full loft/lie/face-progression/length table sourced from Honma's Japan-market official spec sheet, data recorded 5 Dec 2014 ahead of the January 2015 launch: lofts 20/22/25/28/32/36/41/46, lies 59.5-63, face progression (offset) 3.5/3.5/3.7/4.2/4.2/4.2/4.4/4.4 mm (converted to inches here), N.S. Pro Modus3 Tour 120 lengths 38.75 down to 35.25 inches, D2 swing weight throughout, forged S25C mild-steel head with half-mirror/mirror double-layer plating, 3-10 set, and the Vizard IB95 / Modus3 Tour 120 stock shaft pair. Same page's comparison table confirms the TW737 V that followed in 2016 carried the identical 20-46 loft range and 59.5-63 lie range.
- golfpunkhq.com 'The Honma TW727 Iron Range' — describes the V as having 'a wider sole and deeper cavity making it more forgiving, with stronger lofts' than the Vn, and as the range's recommended mid-market cavity-back option; corroborates the January 2015 launch.
- mrtopesgolf.com individual-club listings for TW727V 4-iron (38.25 in) and 6-iron (37.25 in) on steel shafts — corroborate the N.S. Pro Modus3 Tour 120 lengths in the golfnavi table exactly.
- Note on year_discontinued: set to 2016, the year Honma announced the TW737 V; this generation is thinly documented in English-language sources (mostly used-club retailer listings), so confidence is medium.
Last reviewed 2026-07-29. Spot an error? [email protected]