Honma TW737 V Irons Specifications
Full factory loft, lie and length chart for the Honma TW737 V irons, 2016–2018.
- Years produced
- 2016–2018
- Category
- Players Irons
- Construction
- forged
- Material
- mild steel, forged, half-mirror and mirror finish with double-layer plating
- Set makeup
- 3–10
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 20 | 59.5 | 38.75 | 0.108 | D2 |
| 4 | 22 | 60 | 38.25 | 0.1 | D2 |
| 5 | 25 | 60.5 | 37.75 | 0.081 | D2 |
| 6 | 28 | 61 | 37.25 | 0.073 | D2 |
| 7 | 32 | 61.5 | 36.75 | — | D2 |
| 8 | 36 | 62 | 36.25 | — | D2 |
| 9 | 41 | 62.5 | 35.75 | — | D2 |
| 10 | 46 | 63 | 35.25 | — | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW737 V
The V is the classic cavity-back players iron of Honma's 2016 Tour World 737 range (2017 model year), forged from mild steel in Sakata with a thin top line and a traditional 32-degree 7-iron. The set runs 3 through 10 — Honma numbers the pitching wedge as the 10-iron at 46 degrees. Lofts, lies and the general head concept carried over almost unchanged into the TW747 V two years later. Lengths below are the Dynamic Gold AMT steel build; N.S. Pro 950GH builds ran a quarter inch longer and Vizard graphite builds 0.375 inch longer.
Stock shafts
- True Temper Dynamic Gold AMT — steel · flexes: R300, S300, X100
- Nippon N.S. Pro Modus3 Tour 120 — steel · flexes: R, S, X
- Honma Vizard IB95 — graphite
Related models
- Same generation, stronger-lofted semi-players head: Honma TW737 Vs
- Same generation, pocket-cavity distance head: Honma TW737 P
- Successor: Honma TW747 V
- Compare: Honma TW737 V vs Honma TW737 P
- Compare: Honma TW737 V vs Honma TW737 Vs
Frequently asked questions
What is the loft of a Honma TW737 V 7-iron?
The Honma TW737 V 7-iron has a loft of 32 degrees, a lie of 61.5 degrees and a Dynamic Gold AMT steel length of 36.75 inches.
What does the 10-iron in a Honma TW737 V set mean?
It is the pitching wedge. Honma numbers its scoring clubs rather than stamping PW, so the 10 at 46 degrees is the set's pitching wedge.
When were the Honma TW737 irons released?
Honma announced the Tour World 737 range in autumn 2016 for the 2017 season; it was replaced by the TW747 range announced in October 2018.
Finding a used set
The Honma TW737 V ran from 2016 to 2018 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Honma's own TW737 V product page, specification table (honmagolf.com/sea/product-details/245) — every loft, lie and Dynamic Gold AMT length recorded here, the D2 swing weight, the forged mild-steel construction and the DG AMT / Modus3 Tour 120 / Vizard IB95 stock shafts. Offsets are published in millimetres (2.75/2.55/2.05/1.85 mm for the 3-6 irons, converted to inches); Honma does not publish offset for the 7-iron down, so the key is omitted there.
- Honma's original Japanese Tour World TW737 V page (mail.honmagolf.com/products/tour_world/v.php) — corroborates the lofts, the 3-10 set, the forged mild-steel head and the N.S. Pro 950GH option built a quarter inch longer. LIE-ANGLE CONFLICT NOTE: the Japanese-market page lists lies one degree more upright (60.5 to 64.0); this entry follows the international-site spec (59.5 to 63.0), which is also the basis used for the TW747 entries on this site.
- TourSpecGolf blog 'Honma TW737V Irons' — corroborates the autumn 2016 announcement for the 2017 season (year_introduced 2016) and the players-cavity positioning. year_discontinued 2018 is the TW747 range announcement (5 October 2018).
Last reviewed 2026-07-29. Spot an error? [email protected]