Honma TW737 Vs Irons Specifications
Full factory loft, lie and length chart for the Honma TW737 Vs irons, 2016–2018.
- Years produced
- 2016–2018
- Category
- Players Irons
- Construction
- forged
- Material
- mild steel, forged, half-mirror and mirror finish with double-layer plating
- Set makeup
- 3–11
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 19 | 59.5 | 38.75 | 0.108 | D2 |
| 4 | 21 | 60 | 38.25 | 0.108 | D2 |
| 5 | 24 | 60.5 | 37.75 | 0.1 | D2 |
| 6 | 27 | 61 | 37.25 | 0.081 | D2 |
| 7 | 30 | 61.5 | 36.75 | 0.081 | D2 |
| 8 | 34 | 62 | 36.25 | 0.081 | D2 |
| 9 | 38 | 62.5 | 35.75 | 0.073 | D2 |
| 10 | 43 | 63 | 35.25 | 0.073 | D2 |
| 11 | 49 | 63 | 35 | 0.073 | D1 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW737 Vs
The Vs sits between the traditional V and the pocket-cavity P in Honma's 2016 Tour World 737 range: a forged mild-steel cavity back with a slightly larger face and lofts about two degrees stronger than the V (30-degree 7-iron), aimed at players who want a compact look with a little more speed and height. The set runs 3 through 11 — Honma numbers the scoring clubs, so the 43-degree 10 is the pitching wedge and the 49-degree 11 the gap wedge. Lengths below are the N.S. Pro Modus3 Tour 105 steel build; Vizard graphite builds ran 0.375 inch longer.
Stock shafts
- Nippon N.S. Pro Modus3 Tour 105 — steel · flexes: R, S, X
- Honma Vizard IB85 — graphite
Related models
- Same generation, traditional-loft players head: Honma TW737 V
- Same generation, pocket-cavity distance head: Honma TW737 P
- Closest head in the following generation: Honma TW747 Vx
- Compare: Honma TW737 Vs vs Honma TW737 P
- Compare: Honma TW737 Vs vs Honma TW737 V
- Compare: Honma TW737 Vs vs Honma TW747 Vx
Frequently asked questions
What is the loft of a Honma TW737 Vs 7-iron?
The Honma TW737 Vs 7-iron has a loft of 30 degrees, a lie of 61.5 degrees and a Modus3 Tour 105 steel length of 36.75 inches.
What is the difference between the Honma TW737 V and Vs?
The Vs has a slightly larger forged cavity-back head with lofts about two degrees stronger than the V (30 versus 32 degrees in the 7-iron), plus a nine-club set that adds the 49-degree 11 gap wedge. It sits between the V players iron and the P pocket cavity.
What do the 10 and 11 irons in a Honma TW737 Vs set mean?
Honma numbers its scoring clubs: the 10 at 43 degrees is the pitching wedge and the 11 at 49 degrees is the gap wedge.
Finding a used set
The Honma TW737 Vs ran from 2016 to 2018 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Honma's own TW737 Vs product page, specification table (honmagolf.com/sea/product-details/129) — every loft, lie and Modus3 Tour 105 length recorded here, the D2 (steel) / D1 (graphite) swing weights, the forged mild-steel construction and the Modus3 Tour 105 / Vizard IB85 stock shafts. Offsets are published in millimetres (2.75 down to 1.85 mm) and converted to inches here.
- Honma's original Japanese Tour World TW737 Vs page (mail.honmagolf.com/products/tour_world/vs.php) — corroborates every loft (19/21/24/27/30/34/38/43/49) and the 3-11 set makeup. LIE-ANGLE CONFLICT NOTE: the Japanese-market page lists lies one degree more upright (60.5 to 64.0); this entry follows the international-site spec (59.5 to 63.0) for consistency with the other Honma entries on this site.
- GolfWRX, 'Review: Honma TW737-Vs Forged Irons' — corroborates the semi-players positioning between the V and P and the 2016-2017 release window. year_introduced 2016 is the autumn 2016 announcement; year_discontinued 2018 is the TW747 range announcement.
Last reviewed 2026-07-29. Spot an error? [email protected]