Honma TW777 PCB Max Irons Specifications
Full factory loft, lie and length chart for the Honma TW777 PCB Max irons, 2025–present.
- Years produced
- 2025–present
- Category
- Game Improvement Irons
- Construction
- forged body with a full-cup face insert and internal vibration-damping emblem
- Material
- S25C forged soft iron body with an AM355P face (5 to 8) and an ES235 face (9 to SW)
- Set makeup
- 5–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 5 | 22 | 61.5 | 38.25 | 0.138 |
| 6 | 25 | 62 | 37.75 | 0.138 |
| 7 | 28 | 62.5 | 37.25 | 0.118 |
| 8 | 32 | 63 | 36.75 | 0.118 |
| 9 | 36 | 63.5 | 36.25 | 0.098 |
| 10 | 41 | 63.5 | 35.75 | 0.098 |
| 11 | 46 | 63.5 | 35.5 | 0.079 |
| AW | 51 | 63.5 | 35.5 | 0.079 |
| SW | 56 | 64.5 | 35.25 | 0.079 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW777 PCB Max
The PCB Max is the sole genuinely new iron head Honma introduced with the TW777 ("T//World 2026") collection — marketed alongside carried-over Tour V, Vx and Px heads from the TW767 range rather than replacing them outright. It pairs a soft forged S25C body with a full-cup AM355P face on the 5 to 8 irons and a flat ES235 face on the 9-iron through sand wedge, plus a milled "Honma CUT" top-line slope for a cleaner look at address. It is the most forgiving, highest-launching iron in the current T//World range and the only one sold with a stock sand wedge.
Stock shafts
- Honma VIZARD for TW777 — graphite · flexes: R
- Nippon N.S.Pro 950GH neo — steel · flexes: S
Related models
- Predecessor game-improvement head in the T//World lineup: Honma TW767 Hx
- Continuing sibling in the current T//World lineup: Honma TW767 Tour V
- Continuing sibling in the current T//World lineup: Honma TW767 Vx
- Continuing sibling in the current T//World lineup: Honma TW767 Px
- Compare: Honma TW777 PCB Max vs Honma TW767 Hx
- Compare: Honma TW777 PCB Max vs Honma TW767 Tour V
- Compare: Honma TW777 PCB Max vs Honma TW767 Vx
- Compare: Honma TW777 PCB Max vs Honma TW767 Px
Frequently asked questions
What is the loft of a Honma TW777 PCB Max 7-iron?
The Honma TW777 PCB Max 7-iron has a loft of 28 degrees, a lie of 62.5 degrees and a length of 37.25 inches.
Does the Honma TW777 PCB Max come with a sand wedge?
Yes. Unlike the other T//World irons, the PCB Max ships with a 56-degree sand wedge as part of its 5-SW set, in addition to Honma's usual numbered 10 and 11 scoring clubs and an AW.
When was the Honma TW777 PCB Max released?
Honma announced the TW777 collection, including the PCB Max irons, on 11 December 2025, marketed as the T//World 2026 line.
Where it sits in the lineup
Introduced in 2025, the Honma TW777 PCB Max is a current game improvement set in the Honma range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Honma's own TW777 PCB Max product page, us.honmagolf.com/products/tw777-irons — supplied the loft, lie, offset and length figures above, the AM355P (#5-8) / ES235 (#9-SW) face materials, and both stock shaft options with flex.
- Corroborating manufacturer spec table at honmagolf.com/sea/product-details/11108, which independently lists the same lofts, lies and offsets.
- thehackersparadise.com 'Honma TW777 PCB Max Irons' and mygolfspy.com 'The New Honma TW777 Lineup' — confirm the S25C forged body, AM355P/ES235 face split, full-cup face, 'Honma CUT' milled topline, and that the PCB Max is Honma's account-confirmed new iron for the TW777 generation (explicitly described as new construction, not a TW767 carryover).
- firstcallgolf.com 'Honma Golf Debuts the TW777 Series with New Carbon-Powered Performance' (release dated 11 December 2025) — announcement date, used for year_introduced. Honma markets the collection as the 'T//World 2026' line, but the announcement itself fell in December 2025.
- Note: predecessor and successor recorded as null. Honma's press material describes the PCB Max as filling the most-forgiving slot the TW767 Hx previously occupied, but no source explicitly states the Hx was discontinued or formally succeeded by the PCB Max, and the TW767 Hx product page remained live as of the sources retrieved — so no predecessor link is recorded here. Tour V, Vx and Px are not recorded as separate TW777-generation files: their current US product pages still reference the TW767 product manual, and no distinct TW777 spec sheet could be found for them, indicating they continue unchanged rather than being genuinely new models.
Last reviewed 2026-08-30. Spot an error? info@loftchart.com