LoftChart

MacGregor V-FOIL 1025C Irons Specifications

Full factory loft, lie and length chart for the MacGregor V-FOIL 1025C irons, from 2001.

Check MacGregor V-FOIL 1025C prices on eBay Affiliate link
Years produced
from 2001
Category
Game Improvement Irons
Construction
forged V-FOIL cavity back
Material
forged 1025 carbon steel, nickel chrome finish
Set makeup
2–PW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the MacGregor V-FOIL 1025C irons.
ClubLoft (°)Lie (°)Length (in)
21859.539.5
3216039
4246138.5
52761.538
6306237.5
733.562.537
8376336.5
94163.536
PW456435.5

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop MacGregor V-FOIL 1025C

Compare prices for new and used sets on eBay:

See eBay listings

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

MacGregor V-FOIL 1025C loft by clubColumn chart of loft in degrees for each club in the set: 2 18, 3 21, 4 24, 5 27, 6 30, 7 33.5, 8 37, 9 41, PW 45.0°10°20°30°40°50°2: 18°18°2+33: 21°21°3+34: 24°24°4+35: 27°27°5+36: 30°30°6+3.57: 33.5°33.5°7+3.58: 37°37°8+49: 41°41°9+4PW: 45°45°PWClubGapLoft
Loft for each club, 2 to PW. The Gap row is the loft added from one club to the next; gaps run from 3° to 4°.
MacGregor V-FOIL 1025C 7-iron loft angleSide view of the club face tilted 33.5 degrees back from vertical, the loft of the 7-iron.33.5°VerticalFaceTarget
The 7-iron face, drawn at its 33.5° loft from the chart. Head shape is schematic, not to scale.

About the MacGregor V-FOIL 1025C

The Tourney VIP V-FOIL 1025C — clubs are stamped "VIP Tourney V-FOIL Forged" — was the forgiving half of MacGregor's V-FOIL forged pair, sold alongside the 1025M muscleback. Its V-FOIL cavity is about 23 percent larger than a traditional blade's, and MacGregor pitched the result as forgiveness "any 0-36 handicapper will love" while keeping a forged 1025 carbon steel head with progressive offset under a nickel chrome finish. Lofts are mid-era traditional with a 33.5-degree 7-iron and 45-degree pitching wedge across a 2-PW range. Stock shafts were True Temper's Pro-Pel Lite low-bend steel or Graphite Design Distance Series graphite; published lengths are steel, with graphite builds half an inch longer. The Maltby MPF chart dates the design 2001; the spec database files it as a 2002 catalogue model, the announcement-versus-model-year gap recorded here per convention.

Stock shafts

  • True Temper Pro-Pel Lite — steel · light · flexes: R, S
  • Graphite Design Distance Series — graphite · flexes: R, S

Related models

Frequently asked questions

What is the loft of a MacGregor V-FOIL 1025C 7-iron?

The MacGregor V-FOIL 1025C 7-iron has a loft of 33.5 degrees, a lie of 62.5 degrees and a steel-shaft length of 37 inches.

What is the difference between the MacGregor 1025C and 1025M?

Both are forged from 1025 carbon steel with V-FOIL weighting, but the 1025C is the cavity back — a cavity about 23 percent larger than a traditional blade, slightly stronger lofts (33.5 versus 35 degrees at the 7-iron) and lighter stock shafts — while the 1025M is the muscleback for better players.

Are MacGregor V-FOIL 1025C lengths for steel or graphite shafts?

The published lengths are for steel shafts. MacGregor's chart notes graphite builds run half an inch longer per club.

Production status

Introduced in 2001, the MacGregor V-FOIL 1025C has no confirmed end date on file. LoftChart records a discontinuation year only where a source dates it, and none has been found for this set, so it may or may not still be in the MacGregor catalogue — check with MacGregor or a retailer before counting on a new set. Used sets appear on eBay, and should be measured against the chart above before buying, since irons are routinely bent from standard.

Data compiled from:
  • golfclubspec.com (Equip2Golf) 'MacGregor | Tourney VIP 1025C Forged', iron_results.php?id=138 — the full 2-PW loft/lie/length table used here (column alignment verified against the raw HTML cells), plus the stock shaft and grip notes and the steel-length basis
  • macgregorgolf.com official 1025C product page, 1 February 2003 Wayback capture (web.archive.org/web/20030201094318id_/macgregorgolf.com) — corroborates forged 1025 construction, nickel chrome finish, the exact stock shafts and the 0-36 handicapper / 23-percent-larger-cavity positioning
  • The GolfWorks Maltby MPF ratings chart (golfworks.com/content/PDFs/Head_MPFs/MPFRatingsChart.pdf) — lists 'MACGREGOR V-Foil 1025c (forged)' as a 2001 introduction, the year recorded here; golfclubspec files the specs under 2002
  • Note: MacGregor never published per-club offset or bounce for this model; those keys are omitted. No end-of-production year was published — the V-FOIL era gave way to MACTEC from 2004, but the date is unverified, so year_discontinued is left open

Last updated 22 October 2026. Spot an error? info@loftchart.com