Mizuno MP-64 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-64 irons, 2012–2013.
- Years produced
- 2012–2013
- Category
- Players Irons
- Construction
- forged
- Material
- 1025E mild carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.122 | 2 |
| 4 | 24 | 60 | 38.25 | 0.122 | 2 |
| 5 | 27 | 60.5 | 37.75 | 0.122 | 2 |
| 6 | 30 | 61 | 37.25 | 0.114 | 3 |
| 7 | 34 | 61.5 | 36.75 | 0.114 | 3 |
| 8 | 38 | 62 | 36.25 | 0.106 | 4 |
| 9 | 42 | 62.5 | 35.75 | 0.106 | 5 |
| PW | 46 | 63 | 35.5 | 0.106 | 6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-64
The MP-64 replaced the MP-59 as Mizuno's players cavity back and was Grain Flow Forged from a single billet of 1025E mild carbon steel at the Hiroshima plant. It dropped the titanium insert used in the MP-59 in favour of a one-piece forging with a shallower cavity, a thinner topline and slightly less offset. The stock set was 3-PW, running 21 degrees in the 3-iron to 46 degrees in the pitching wedge with a 34-degree 7-iron. Specs below are the men's standard steel-shaft build.
Stock shafts
- True Temper Dynamic Gold — steel
- True Temper Dynalite Gold XP — steel
Related models
- Predecessor: Mizuno MP-59
- Successor: Mizuno MP-4
- Compare: Mizuno MP-64 vs Mizuno MP-4
- Compare: Mizuno MP-64 vs Mizuno MP-59
Frequently asked questions
What is the loft of a Mizuno MP-64 7-iron?
The Mizuno MP-64 7-iron has a loft of 34 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What is the pitching wedge loft on the Mizuno MP-64?
The MP-64 pitching wedge is 46 degrees, which is around 2 degrees weaker than a typical players-distance pitching wedge of the same era.
Are the Mizuno MP-64 irons forged?
Yes. The MP-64 is Grain Flow Forged from a single billet of 1025E mild carbon steel, with no inserts or multi-material construction.
Finding a used set
The Mizuno MP-64 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Mizuno MP-64 Iron Set product page, loft/lie/length/bounce spec table and shaft listings
- GolfWRX Mizuno MP-64 irons editor review (spec table including offset, construction detail)
- MyGolfSpy 'The Club Report - Mizuno MP-64 Irons' (positioning and materials)
- Note: the MP-64 was introduced in September 2012, not 2013. TheSandTrap's 'New Irons from Mizuno' (9 October 2012) states 'This September Mizuno released four new sets of irons', the MP-64 among them; GolfWRX describes the same clubs as Mizuno's 2013 lineup, which is the marketing model year rather than the introduction year. Corrected to 2012, and year_discontinued to 2013 to follow the MP-4's corrected date.
Last reviewed 2026-07-22. Spot an error? [email protected]