Mizuno MP-H5 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-H5 irons, 2014–2017.
- Years produced
- 2014–2017
- Category
- Players Distance Irons
- Construction
- cast/forged hybrid
- Material
- Grain Flow Forged 1025E face and neck with hollow steel body
- Set makeup
- 1–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 1 | 16 | 58.5 | 39.75 | 0.154 | 0 |
| 2 | 18 | 59 | 39.25 | 0.15 | 0 |
| 3 | 21 | 59.5 | 38.75 | 0.146 | 0 |
| 4 | 24 | 60 | 38.25 | 0.142 | 0.5 |
| 5 | 27 | 60.5 | 37.75 | 0.134 | 1 |
| 6 | 30 | 61 | 37.25 | 0.126 | 2 |
| 7 | 34 | 61.5 | 36.75 | 0.122 | 3 |
| 8 | 38 | 62 | 36.25 | 0.118 | 3 |
| 9 | 42 | 62.5 | 35.75 | 0.11 | 4 |
| PW | 46 | 63 | 35.5 | 0.102 | 5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-H5
The MP-H5 refined Mizuno's hollow-body MP iron for the 2015 line, launched in autumn 2014 alongside the MP-15. The hollow construction runs through the whole 1-PW range with a progressively thinner profile toward the short irons, keeping the high-launch long irons while sharpening the look and turf feel of the scoring clubs. Lofts stay traditional, with a 34-degree 7-iron and 46-degree pitching wedge, and offset is modest throughout. No direct MP-H successor followed; the hollow role passed to the MP-18 family's MMC Fli-Hi in 2017. Specs below are the standard steel build.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Predecessor hollow iron: Mizuno MP-H4
- Multi-material iron launched alongside it: Mizuno MP-15
- The MP-18 family that took over the range: Mizuno MP-18 MMC
- Compare: Mizuno MP-H5 vs Mizuno MP-18 MMC
Frequently asked questions
What is the loft of a Mizuno MP-H5 7-iron?
The Mizuno MP-H5 7-iron has a loft of 34 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What is the difference between the MP-H4 and MP-H5?
Both are hollow-bodied with Grain Flow Forged faces. The MP-H5 extends the range to a 16-degree 1-iron, thins the profile progressively toward the short irons for a cleaner look and better turf interaction, and trims offset slightly in the scoring clubs.
Did Mizuno make an MP-H6?
No. The MP-H5 was the last MP-H model; when the MP-18 family arrived in 2017, the hollow long-iron role passed to the MP-18 MMC Fli-Hi.
Finding a used set
The Mizuno MP-H5 ran from 2014 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- GolfWRX Club Techs thread 'Mizuno MP-H5 specs and tolerances' quoting Mizuno's published 1-PW loft/lie/length/offset table; intheholegolf.com's MP-H5 iron set listing reproduces the same table (its 2-iron loft is misprinted 12, clearly 18) with Dynamic Gold as the standard shaft
- Launch timing: Golfalot's Mizuno MP-H5 review is dated 16 September 2014, alongside the MP-15's autumn 2014 launch; year_introduced 2014 follows the announcement-year convention used for the repo's MP-15 file
- year_discontinued 2017 reflects the MP-18 family announcement (including the hollow MMC Fli-Hi) replacing the MP range; no MP-H6 was ever released
Last reviewed 2026-07-29. Spot an error? [email protected]