Mizuno MX-200 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MX-200 irons, 2009–2010.
- Years produced
- 2009–2010
- Category
- Game Improvement Irons
- Construction
- Grain Flow Forged with a Y-Tune pocket cavity
- Material
- 1025E Pure Select mild carbon steel
- Set makeup
- 3–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 20 | 59.5 | 38.75 | 0.211 | 1 |
| 4 | 23 | 60 | 38.25 | 0.201 | 2 |
| 5 | 26 | 60.5 | 37.75 | 0.191 | 2 |
| 6 | 29 | 61 | 37.25 | 0.181 | 2 |
| 7 | 33 | 61.5 | 36.75 | 0.171 | 3 |
| 8 | 37 | 62 | 36.25 | 0.161 | 4 |
| 9 | 41 | 62.5 | 35.75 | 0.152 | 5 |
| PW | 45 | 63 | 35.5 | 0.142 | 6 |
| GW | 50 | 63 | 35.25 | 0.122 | 7 |
| SW | 55 | 63 | 35.25 | 0.102 | 12 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MX-200
The MX-200 is the last forged game-improvement iron of Mizuno's MX era, launched in 2009 and effectively replaced when the JPX-800 family arrived a year later. It is Grain Flow Forged in one piece with a deep milled pocket cavity and a Y-shaped reinforcement pad — Mizuno's Y-Tune design — that pushes the sweet area toward the toe. Lofts are moderate for the category, 33 degrees at the 7-iron and 45 at the pitching wedge, with a full offset ladder from 0.211 inches at the 3-iron. The typical retail set was 4-iron through gap wedge, with the 3-iron and a 55-degree sand wedge catalogued. Figures are the men's standard steel build.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Earlier forged MX model: Mizuno MX-25
- Compact partner of the same generation: Mizuno MX-300
- Replaced in the range by: Mizuno JPX-800
- Compare: Mizuno MX-200 vs Mizuno MX-19
- Compare: Mizuno MX-200 vs Mizuno MX-25
- Compare: Mizuno MX-200 vs Mizuno JPX-800
Frequently asked questions
What is the loft of a Mizuno MX-200 7-iron?
The Mizuno MX-200 7-iron has a loft of 33 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
Are the Mizuno MX-200 irons forged?
Yes. They are Grain Flow Forged in one piece from 1025E Pure Select mild carbon steel, with a milled pocket cavity behind the face.
What replaced the Mizuno MX-200?
Mizuno retired the MX line after the MX-200 and MX-300; the cast JPX-800 and forged JPX-800 Pro, launched in 2010, took over their slots in the range.
Finding a used set
The Mizuno MX-200 ran from 2009 to 2010 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Full specification table (loft, lie, offset, bounce, length, 3-SW) as reposted on forums.golfwrx.com thread 'Mizuno MX200 Iron specs?', March 2025
- golfclubspec.com iron specification database via qsponge.com (independently corroborates loft and lie, 3-PW)
- todays-golfer.com Mizuno MX200 review (2009 release, Grain Flow Forged 1025E, Y-Tune pocket cavity); thehackersparadise.com review confirms the 4-GW retail set and Dynamic Gold S300 stock shaft
- year_introduced 2009 per the Today's Golfer review and the mizunogolf.com irons timeline (2009-2010); the model is sometimes listed as 2008, but no 2008 source was found
Last reviewed 2026-07-28. Spot an error? [email protected]