Nike Vapor Speed Irons Specifications
Full factory loft, lie and length chart for the Nike Vapor Speed irons, 2015–present.
- Years produced
- 2015–present
- Category
- Game Improvement Irons
- Construction
- cast cavity back with face-centred weighting
- Material
- cast stainless steel
- Set makeup
- 3–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 19 | 59 | 39.75 | 0.18 | 3 | D2.5 |
| 4 | 21 | 60 | 39.25 | 0.17 | 4 | D2.5 |
| 5 | 24 | 61 | 38.75 | 0.155 | 5 | D2.5 |
| 6 | 28 | 62 | 38.25 | 0.14 | 6 | D2.5 |
| 7 | 32 | 62.5 | 37.75 | 0.125 | 7 | D2.5 |
| 8 | 36 | 63 | 37.25 | 0.11 | 8 | D2.5 |
| 9 | 40 | 63.5 | 36.75 | 0.095 | 9 | D2.5 |
| PW | 44 | 64 | 36.5 | 0.08 | 10 | D2.5 |
| AW | 49 | 64 | 36.25 | 0.065 | 11 | D2.5 |
| SW | 54 | 64 | 36 | 0.05 | 11 | D5.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Nike Vapor Speed
Vapor Speed is the game-improvement model of the Vapor family Nike unveiled with Tiger Woods and Rory McIlroy in August 2014 — the forgiving counterpart to the Vapor Pro and Vapor Pro Combo. Weight sits low and forward behind the face throughout the set for a higher, more forgiving launch, and the set is built long, at 39.75 inches for the 3-iron. The sand wedge is much heavier than the rest of the set, at D5.5.
Stock shafts
- True Temper Dynalite — steel
Related models
- The players model of the same family: Nike Vapor Pro
- Nike's next game-improvement iron: Nike Vapor Fly
- Compare: Nike Vapor Speed vs Nike Vapor Pro
Frequently asked questions
What is the loft of a Nike Vapor Speed 7-iron?
The Nike Vapor Speed 7-iron has a loft of 32 degrees, a lie of 62.5 degrees and a length of 37.75 inches.
When were Nike Vapor Speed irons made?
Nike unveiled the Vapor family in August 2014 and the Vapor Speed irons reached retail on 31 January 2015.
Why is the Nike Vapor Speed sand wedge so much heavier?
It is built to D5.5 against D2.5 for the rest of the set — three full swing-weight points heavier — which is normal for a wedge sold as part of an iron set but unusually large a jump here.
Where it sits in the lineup
Introduced in 2015, the Nike Vapor Speed is a current game improvement set in the Nike range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- 2nd Swing Golf specification table for the Nike Vapor Speed iron set (https://www.2ndswing.com/golf-clubs/iron-sets/nike-vapor-speed-iron-set) — supplied every loft, lie, length, offset, bounce and swing weight above and the True Temper Dynalite stock shaft.
- golfcanada.ca 'Nike Golf unveils Vapor Iron Franchise' and golfmagic.com 'First Look: Nike Vapor Speed Irons' — the Vapor family (Pro, Pro Combo and Speed) was unveiled near New York in August 2014 with Tiger Woods and Rory McIlroy, and the Speed irons reached retail on 31 January 2015.
- Note on the year: year_introduced records 2015 for consistency with the other Nike Vapor entries in this database, which use the retail year. The August 2014 unveiling is noted above so the gap is visible.
- Note: confidence is medium — the figures come from a retailer spec table rather than a Nike spec sheet, and Nike left the club business in 2016, so no manufacturer page survives.
Last reviewed 2026-07-28. Spot an error? [email protected]