Ping G15 Irons Specifications
Full factory loft, lie and length chart for the Ping G15 irons, 2009–2011.
- Years produced
- 2009–2011
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- 17-4 stainless steel
- Set makeup
- 3–LW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 20 | 59.25 | 38.75 | 0.32 | -2 | D0 |
| 4 | 23 | 60 | 38.25 | 0.3 | 0 | D0 |
| 5 | 26 | 60.75 | 37.75 | 0.28 | 2 | D0 |
| 6 | 29 | 61.5 | 37.25 | 0.26 | 4 | D0 |
| 7 | 32 | 62.25 | 36.75 | 0.24 | 6 | D0 |
| 8 | 36 | 63 | 36.25 | 0.22 | 8 | D0 |
| 9 | 40 | 63.75 | 35.75 | 0.2 | 9 | D0 |
| PW | 45 | 64 | 35.5 | 0.18 | 10 | D2 |
| UW | 50 | 64 | 35.5 | 0.15 | 11 | D2 |
| SW | 54 | 64.25 | 35.25 | 0.13 | 12 | D4 |
| LW | 58 | 64.5 | 35 | 0.1 | 12 | D6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Ping G15
The G15 is a wide-soled, high-launch game-improvement iron with a Custom Tuning Port and heavily progressive offset — 0.32 inches in the 3-iron tapering to 0.10 inches in the lob wedge. Lofts are strong for the era: the 7-iron is 32 degrees, four degrees stronger than the 1980s Ping Eye 2 and 2.3 degrees stronger than the 2003 G2. Ping's colour-code (dot) system sets lie angle relative to standard: gold 4 flat, brown 3 flat, orange 2 flat, red 1 flat, BLACK standard, blue 1 upright, green 2 upright, white 3 upright, silver 4 upright, maroon 5 upright. The lies below are the BLACK (standard) lies. Graphite-shafted clubs run one swing-weight point lighter than the steel values shown.
Stock shafts
- Ping AWT — steel · 99-117g · flexes: R, S, X
- Ping TFC 149I — graphite · 74-86g (44g in L flex) · flexes: L, SR, R, S
Related models
- Earlier G-series iron: Ping G2
- Later G-series iron: Ping G25
- Compare: Ping G15 vs Ping G10
- Compare: Ping G15 vs Ping G20
- Compare: Ping G15 vs Ping G2
- Compare: Ping G15 vs Ping G25
Frequently asked questions
What is the loft of a Ping G15 7-iron?
The Ping G15 7-iron has a loft of 32 degrees, a standard (black dot) lie of 62.25 degrees and a steel-shaft length of 36.75 inches.
What are the Ping G15 wedge lofts?
The pitching wedge is 45 degrees, the utility wedge 50, the sand wedge 54 and the lob wedge 58 degrees.
How much offset do Ping G15 irons have?
Offset is progressive, running from 0.32 inches in the 3-iron down to 0.10 inches in the lob wedge, with 0.24 inches at the 7-iron.
Finding a used set
The Ping G15 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Morton Golf Sales PING G15 individual irons spec table (loft, lie, length, offset, bounce, swing weight for 3-iron through LW; reproduces Ping's published chart)
- Secondary retailer/review spec listings corroborating the 3-iron through PW loft/lie/length/offset/bounce values
- GolfWorks Ping shaft replacement reference PDF (2010 G15 Irons — AWT steel R/S/X 99/108/117g; TFC 149I graphite SR/R/S 74-86g and L 44g)
- TGW / PGA Tour Superstore Ping colour code chart guides (black dot = standard lie)
Last reviewed 2026-07-22. Spot an error? [email protected]