Ping G30 Irons Specifications

Full factory loft, lie and length chart for the Ping G30 irons, 2014–2016.

Years produced
2014–2016
Category
Game Improvement Irons
Construction
investment cast
Material
17-4 stainless steel
Set makeup
4–LW

Loft, lie & length chart

Standard men's steel-shaft specifications for the Ping G30 irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)BounceSwing wt
42159.0638.8750.295D0
5246038.250.266D0
62760.9437.6250.237D0
730.561.88370.28D0
83562.8136.50.189D0
94063.75360.1611D0
PW456435.50.1412D2
UW506435.50.1212D2
SW5464.2535.250.113D4
LW5864.5350.0813D6

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop Ping G30

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

Ping G30 loft by clubColumn chart of loft in degrees for each club in the set: 4 21, 5 24, 6 27, 7 30.5, 8 35, 9 40, PW 45, UW 50, SW 54, LW 58.0°10°20°30°40°50°60°4: 21°21°4+35: 24°24°5+36: 27°27°6+3.57: 30.5°30.5°7+4.58: 35°35°8+59: 40°40°9+5PW: 45°45°PW+5UW: 50°50°UW+4SW: 54°54°SW+4LW: 58°58°LWClubGapLoft
Loft for each club, 4 to LW. The Gap row is the loft added from one club to the next; gaps run from 3° to 5°.
Ping G30 7-iron loft angleSide view of the club face tilted 30.5 degrees back from vertical, the loft of the 7-iron.30.5°VerticalFaceTarget
The 7-iron face, drawn at its 30.5° loft from the chart. Head shape is schematic, not to scale.

About the Ping G30

The G30 dropped the 3-iron from the stock set and strengthened the middle irons again, putting the 7-iron at 30.5 degrees. Lengths were re-cut on a new progression — the 4-iron is 38.875 inches and the 7-iron 37.0 — and offset was reduced across the board against the G25. Ping's colour-code (dot) system sets lie angle relative to standard: gold 4 flat, brown 3 flat, orange 2 flat, red 1 flat, BLACK standard, blue 1 upright, green 2 upright, white 3 upright, silver 4 upright, maroon 5 upright. The lies below are the BLACK (standard) lies.

Related models

Frequently asked questions

What is the loft of a Ping G30 7-iron?

The Ping G30 7-iron has a loft of 30.5 degrees, a standard (black dot) lie of 61.88 degrees and a steel-shaft length of 37.0 inches.

When were Ping G30 irons made?

The G30 was introduced in 2014 and was replaced by the G in 2016.

Are Ping G30 lofts stronger than the G25?

Yes. The G30 7-iron is 30.5 degrees against 32 for the G25, and the G30 set starts at the 4-iron rather than the 3-iron.

Finding a used set

The Ping G30 ran from 2014 to 2016 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • Official Ping specification chart for the G30 irons (ping.com product spec page via archive.org)
  • Note: year_discontinued is taken as the year the successor model was introduced, per the Ping model chronology.

Last updated 28 July 2026. Spot an error? info@loftchart.com