Ping G700 Irons Specifications
Full factory loft, lie and length chart for the Ping G700 irons, 2018–2020.
- Years produced
- 2018–2020
- Category
- Super Game Improvement Irons
- Construction
- hollow body with a maraging steel face
- Material
- maraging C300 steel face plasma-welded to a 17-4 stainless body
- Set makeup
- 4–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 4 | 20 | 60.5 | 38.875 | 0.29 | C9 |
| 5 | 23 | 61 | 38.25 | 0.26 | C9 |
| 6 | 26 | 61.5 | 37.625 | 0.23 | C9 |
| 7 | 29.5 | 62 | 37 | 0.2 | C9 |
| 8 | 34 | 62.8 | 36.5 | 0.18 | C9 |
| 9 | 39 | 63.5 | 36 | 0.16 | C9.5 |
| PW | 44 | 64.1 | 35.5 | 0.13 | D1 |
| UW | 49 | 64.1 | 35.5 | 0.11 | D1 |
| SW | 54 | 64.4 | 35.25 | 0.09 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Ping G700
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Ping G700
The G700 was Ping's first hollow-body distance iron, built like a metalwood: a thin maraging C300 face plasma-welded to a hollow 17-4 stainless body with internal metal-injection-moulded weighting. It sits a full club stronger than the G400 of the same period, with a 29.5-degree 7-iron and a 44-degree pitching wedge, and is built long — the 4-iron measures 38.875 inches. Head weight is light enough that the stock steel build comes out at C9. Lies below are the black (standard) colour code.
Stock shafts
- Ping AWT 2.0 — steel
- True Temper Dynamic Gold — steel
- FST KBS Tour — steel
- Ping Alta CB — graphite
- UST Recoil ES SmacWrap — graphite
Related models
Frequently asked questions
What is the loft of a Ping G700 7-iron?
The Ping G700 7-iron has a loft of 29.5 degrees, a standard (black dot) lie of 62.0 degrees and a steel-shaft length of 37.00 inches.
When were Ping G700 irons made?
The G700 was introduced in 2018 and was replaced by the G710 in 2020.
How strong are Ping G700 lofts?
Very strong for the period. The 7-iron is 29.5 degrees and the pitching wedge 44 degrees, about a club stronger than the G400 of the same era.
Why is the Ping G700 swing weight only C9?
The hollow head is light and the set is built long — 38.875 inches at the 4-iron — so the stock steel build measures C9 through the mid irons and rises to D1 in the wedges.
Finding a used set
The Ping G700 ran from 2018 to 2020 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Ping G700 Iron Set specification table — loft, lie, length, offset and swing weight for the 4-iron through sand wedge, plus the stock shaft list.
- swingyard.com 'PING Irons by Year' — dates the G700 to 2018 and the G710 to 2020.
- Note: bounce was not published in the source consulted and is omitted rather than estimated. Confidence is medium because no Ping spec sheet for the discontinued model was located.
- essential.golf 'Ping G700 Irons Launched' — the G700, announced 15 January 2018, launched 'as a replacement for the GMax irons', which sets the predecessor field.
Last updated 28 July 2026. Spot an error? info@loftchart.com