Srixon ZXi Driver Specifications
Stock lofts for every Srixon ZXi head and the full hosel adjustment chart, from 2025.
- Years produced
- from 2025
- Category
- Flagship Driver Line
- Head variants
- Std, LS, Max
- Loft range
- 8°–12°
- Head size
- 460 cc
- Hosel
- QTS 1.5 sleeve · ±1.5°
Stock lofts by head variant
| Head | Stock lofts | Head size | Lie (°) | Length (in) |
|---|---|---|---|---|
| ZXi | 9°, 10.5° | 460 cc | 59 | 45.75 |
| ZXi LS | 8°, 9°, 10.5° | 460 cc | 59 | 45.75 |
| ZXi Max | 9°, 10.5°, 12° | 460 cc | 59 | 45.75 |
Lofts are the stamped stock options for each head, factory standard. The hosel chart below shows how far each can be adjusted from its stamped loft.
Length note: Srixon notes the published ZXi lengths grew about half an inch over prior generations because of a change in measurement method only — the physical builds did not get longer.
Hosel adjustment chart
QTS 1.5 sleeve · loft ±1.5° · 12 settings.
Every position other than standard also flattens lie, from 0.5° to 3° flat; there is no upright setting. Face angle moves up to 3° closed on the loft-up side and 3° open on the loft-down side.
| Setting | Loft | Lie | Face angle |
|---|---|---|---|
| STD | std | std | square |
| +0.5° | +0.5° | 0.5° flat | 1° closed |
| +1° | +1° | 1° flat | 2° closed |
| +1.5° | +1.5° | 1.5° flat | 3° closed |
| +1° FL | +1° | 2° flat | 2° closed |
| +0.5° FL | +0.5° | 2.5° flat | 1° closed |
| STD FL | std | 3° flat | square |
| −0.5° FL | −0.5° | 2.5° flat | 1° open |
| −1° FL | −1° | 2° flat | 2° open |
| −1.5° | −1.5° | 1.5° flat | 3° open |
| −1° | −1° | 1° flat | 2° open |
| −0.5° | −0.5° | 0.5° flat | 1° open |
The chart is Srixon's official hosel sleeve adjustability guide for the ZXi woods. "FL" marks the flat-lie variants of each loft setting.
Shop Srixon ZXi
Compare prices for new and used drivers on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Lofts at a glance
About the Srixon ZXi
The ZXi is Srixon's 2025 driver family, at retail from 24 January 2025 and the first generation on the QTS 1.5 sleeve with its twelve loft, lie and face-angle settings. A razor-thin titanium crown over the internal Star Frame ribs frees mass for each head's weighting scheme: the core ZXi carries heel and toe weights for bias tuning, the LS runs front and rear weights to manage spin, and the Max — Srixon's highest-MOI driver at launch — uses a single removable rear weight. Laser Face Milling on the Ti72S face keeps spin consistent in the wet. The ZXi RKT replaced the family in October 2026, with the ZXi staying on sale at a reduced price while stock lasts.
Head variants
The heads this family is sold in, with each one’s stock loft options.
- ZXi9°, 10.5°
- The all-around head for most players — mid-high launch, mid-low spin — with heel and toe adjustable weights for draw or fade bias.
- ZXi LS8°, 9°, 10.5°
- The low-spin head for faster swings fighting ballooning flight, with front and rear sole weights to tune spin. 10.5° is right-hand only.
- ZXi Max9°, 10.5°, 12°
- Srixon's highest-MOI driver at launch, built for maximum forgiveness; a single removable rear weight changes swing weight without changing MOI. 9° is right-hand only; a women's 12° build at 44.75 inches is sold alongside.
Stock shafts
- Fujikura Ventus TR Blue 6 (ZXi) — graphite · flexes: R, S, X
- Project X HZRDUS Black Gen 5 60/70 (LS) — graphite · flexes: R, S, X
- Project X Denali Red 5 (Max) — graphite · flexes: A, R, S
Related models
Driver loft guides
How to pick between these stock lofts:
Frequently asked questions
What lofts does the Srixon ZXi come in?
The core ZXi comes in 9 and 10.5 degrees, the ZXi LS in 8, 9 and 10.5 (10.5 right-hand only), and the ZXi Max in 9, 10.5 and 12 (9 right-hand only).
What is the ZXi adjustment chart?
The QTS 1.5 sleeve has twelve settings covering ±1.5 degrees of loft. Each non-standard position also flattens lie by 0.5 to 3 degrees and moves the face up to 3 degrees closed (loft up) or open (loft down); 'FL' positions are the flat-lie variants.
What is the difference between the ZXi, ZXi LS and ZXi Max?
The ZXi is the all-rounder with heel/toe bias weights; the LS moves its two weights front-to-back to cut spin for faster swings; the Max is the maximum-forgiveness head whose single rear weight changes swing weight without affecting MOI.
Is the Srixon ZXi still in production?
The ZXi RKT replaced it in October 2026, but the ZXi remains on Srixon's site at a reduced price while stock lasts — making it the value pick of the two generations.
Buying one
Srixon has since introduced the Srixon ZXi RKT above it in the range, so the ZXi is at the end of its retail life rather than fully retired — closeout stock still turns up at retailers, and drivers one generation back are the sweet spot of the used market. Before buying used, check the stamped loft against the chart above and ask which hosel setting it is in — an adjustable driver may be set a degree or more away from the number on the sole, and sleeve adapters are brand- and generation-specific.
- Srixon ZXi, ZXi LS and ZXi Max official spec pages (lofts, 59° lie, 45.75 inch, stock shafts, 1.5° sleeve), us.dunlopsports.com, accessed October 2026
- Srixon ZXi woods hosel sleeve adjustment guide PDF (the official 12-position loft/lie/face chart), us.dunlopsports.com, accessed October 2026
- Golf.com ZXi launch coverage (24 January 2025 retail, $549.99, Ti72S face, per-head weighting), golf.com, accessed October 2026
Last updated 23 October 2026. Spot an error? info@loftchart.com