TaylorMade 300 Forged Irons Specifications
Full factory loft, lie and length chart for the TaylorMade 300 Forged irons, 2001–2003.
- Years produced
- 2001–2003
- Category
- Players Irons
- Construction
- forged
- Material
- carbon steel
- Set makeup
- 1–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 1 | 17 | 57 | 39.75 | 0.173 |
| 2 | 19 | 58 | 39.25 | 0.163 |
| 3 | 21 | 59 | 38.75 | 0.154 |
| 4 | 24 | 60 | 38.25 | 0.144 |
| 5 | 27 | 60.5 | 37.75 | 0.134 |
| 6 | 31 | 61 | 37.25 | 0.124 |
| 7 | 35 | 61.5 | 36.75 | 0.114 |
| 8 | 39 | 62 | 36.25 | 0.104 |
| 9 | 43 | 62.5 | 35.75 | 0.094 |
| PW | 48 | 63 | 35.5 | 0.085 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade 300 Forged
The 300 Forged was TaylorMade's tour iron for 2001, a compact carbon-steel head double-struck in a forging process the company called coining, with a thin topline and only a slight amount of offset. The centre of gravity moves progressively through the set and an impact pad sits behind the sweet spot for feel. Lofts are traditional rather than strong, with a 35-degree 7-iron and a 48-degree pitching wedge, and the documented range runs from a 1-iron to a pitching wedge. Specs below are the men's standard steel-shaft build.
Stock shafts
- Royal Precision Rifle Flighted — steel
Related models
- Later TaylorMade tour blade: TP MB
- Later TaylorMade players cavity: TP CB
- Compare: TaylorMade 300 Forged vs TaylorMade TP MB
- Compare: TaylorMade 300 Forged vs TaylorMade TP CB
Frequently asked questions
What is the loft of a TaylorMade 300 Forged 7-iron?
The TaylorMade 300 Forged 7-iron has a loft of 35 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What year did the TaylorMade 300 Forged irons come out?
The 300 Forged irons were introduced in 2001 and were sold until the rac line took over the TaylorMade iron range in 2003.
What is the pitching wedge loft on the TaylorMade 300 Forged?
The 300 Forged pitching wedge is 48 degrees. The set uses traditional loft gaps of 3 to 4 degrees, so it runs roughly 4 to 6 degrees weaker than a modern game-improvement set.
Finding a used set
The TaylorMade 300 Forged is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- equip2golf.com TaylorMade 300 Forged specification page (loft, lie, steel length and offset in mm for 1-iron through pitching wedge; notes steel shafts only, Rifle Flighted stock shaft, right hand only)
- qsponge.com TaylorMade 300 Forged iron specification table (corroborating the same 17-48 degree loft range, 57-63 degree lies and 39.75-35.5 inch lengths)
- 2ndswing.com TaylorMade 300 iron set product page (carbon steel forged construction, coining process, progressive centre of gravity)
Last reviewed 2026-07-22. Spot an error? [email protected]