TaylorMade P770 (2017) Irons Specifications

Full factory loft, lie and length chart for the TaylorMade P770 (2017) irons, 2017–2018.

Years produced
2017–2018
Category
Players Irons
Construction
forged cavity back with tungsten back bar
Material
forged 1025 carbon steel with a tungsten back bar in the 3 to 7 irons
Set makeup
3–AW

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade P770 (2017) irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
320.560.538.750.142D2
4236138.250.13D2
52661.537.750.118D2
629.56237.250.106D2
73362.536.750.094D2
8376336.250.087D2
941.563.535.750.075D2
PW466435.50.063D3
AW516435.50.063D3

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the TaylorMade P770 (2017)

The original P770 launched TaylorMade's P-Series players range in 2017 alongside the more compact P750 Tour Proto, after unnamed prototypes had surfaced on tour in late 2016. It is a solid forged 1025 carbon steel players cavity back — no relation in construction to the hollow-body irons that revived the name in 2020 — with a tungsten back bar in the 3 to 7 irons for a low, centred CG, a thin topline, progressive offset and a precision-milled face. Lofts are traditional for the category, 33 degrees at the 7-iron and a 46-degree pitching wedge, over a 3-iron through approach wedge range. Figures are the men's standard right-handed steel build.

Stock shafts

Related models

Frequently asked questions

What is the loft of a TaylorMade P770 (2017) 7-iron?

The original 2017 P770 7-iron has a loft of 33 degrees, a lie of 62.5 degrees and a steel-shaft length of 36.75 inches.

Is the 2017 P770 the same iron as the later P770 models?

No. The original P770 is a solid forged 1025 carbon steel cavity back with a tungsten back bar; TaylorMade revived the name in 2020 for a hollow-body SpeedFoam design. Lengths also differ — the 2017 set is a quarter inch shorter through the set, 36.75 inches at the 7-iron against 37.00.

What is the pitching wedge loft on the 2017 P770?

The pitching wedge is 46 degrees, with a 51-degree approach wedge available below it.

When was the original TaylorMade P770 made?

It was announced in January 2017 after prototypes appeared on tour in late 2016, reached retail on 31 March 2017, and was replaced in October 2018 when the P760 took over from both the P770 and the P750 Tour Proto.

Finding a used set

The TaylorMade P770 (2017) ran from 2017 to 2018 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • TaylorMade official 2017 P770 Irons spec sheet PDF, taylormadegolf.com/on/demandware.static/-/Sites-TMaG-Library/default/docs/productspecs/2017/P770 Irons.pdf — supplied every loft, lie, offset, length and swing weight above, plus the KBS Tour FLT (S/X) stock steel shaft (graphite custom only) and the Golf Pride Tour Velvet 360 grip. Offset is published in millimetres (3.6 mm down to 1.6 mm) and converted to inches here.
  • Note: bounce is not published on the manufacturer sheet and is omitted rather than estimated.
  • Launch basis for year_introduced: unnamed Tour Proto prototypes were seen in play in November 2016 (2016 RSM Classic), the irons were announced as the P770 and P750 Tour Proto in January 2017 (thegolfnewsnet.com preview of 18 January 2017; golf.com first look), and the P770 reached retail on 31 March 2017 — so 2017 is the announcement year under the schema convention.
  • Succession: TaylorMade announced the P760 on 15 October 2018 (newsroom.taylormadegolf.com press release), a progressive set that replaced both the P770 and the P750 Tour Proto in the players line, which sets year_discontinued and the successor field.

Last reviewed 2026-07-28. Spot an error? [email protected]