TaylorMade P760 Irons Specifications
Full factory loft, lie and length chart for the TaylorMade P760 irons, 2018–2020.
- Years produced
- 2018–2020
- Category
- Players Irons
- Construction
- forged multi-material, hollow in the long irons
- Material
- forged 1025 carbon steel with a 4140 face in the long irons and tungsten weighting
- Set makeup
- 3–AW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 19.5 | 60.5 | 39 | 0.13 | D2 |
| 4 | 22 | 61 | 38.5 | 0.122 | D2 |
| 5 | 25.5 | 61.5 | 38 | 0.11 | D2 |
| 6 | 29 | 62 | 37.5 | 0.098 | D2 |
| 7 | 33 | 62.5 | 37 | 0.091 | D2 |
| 8 | 37 | 63 | 36.5 | 0.083 | D2 |
| 9 | 41.5 | 63.5 | 36 | 0.075 | D2 |
| PW | 46 | 64 | 35.75 | 0.067 | D3 |
| AW | 51 | 64 | 35.5 | 0.063 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade P760
The P760 is a progressive set: the 3 to 7 irons are hollow-bodied with a thin 4140 face and internal SpeedFoam, while the 8-iron through wedges are solid forged cavity backs, so the long irons launch like a distance iron and the scoring clubs behave like a players iron. Tungsten sits low in the toe of the long irons. Lofts are traditional for the players category, 33 degrees at the 7-iron and 46 at the pitching wedge, which puts it three degrees weaker than the P790 of the same period. Figures are the men's standard steel build.
Stock shafts
- True Temper Dynamic Gold 120 — steel
Related models
- Distance sibling: TaylorMade P790 (2017)
- Later players hollow body: TaylorMade P770
- Forged cavity back: TaylorMade P7MC
- Compare: TaylorMade P760 vs TaylorMade P790 (2017)
- Compare: TaylorMade P760 vs TaylorMade P7MC
Frequently asked questions
What is the loft of a TaylorMade P760 7-iron?
The TaylorMade P760 7-iron has a loft of 33 degrees, a lie of 62.5 degrees and a steel-shaft length of 37.00 inches.
When were TaylorMade P760 irons made?
The P760 was introduced in 2018 and stayed in the range until the P770 took over that slot in 2020.
Is the TaylorMade P760 hollow?
Only in part. The 3 to 7 irons are hollow with a thin 4140 face and SpeedFoam inside; the 8-iron through wedges are solid forged cavity backs.
How do P760 lofts compare with the P790?
The P760 is about three degrees weaker through the set — 33 degrees at the 7-iron against the P790's 30.5, and 46 at the pitching wedge against 45 — at the same lengths.
Finding a used set
The TaylorMade P760 ran from 2018 to 2020 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com TaylorMade P760 Iron Set specification table — loft, lie, length, offset (in millimetres) and swing weight for the 3-iron through approach wedge, the 4-PW stock make-up, the Dynamic Gold 120 stock shaft and the Golf Pride Tour Velvet 360 grip. Offset is converted to inches here.
- Note: bounce was not published in the source consulted and is omitted rather than estimated.
Last reviewed 2026-07-28. Spot an error? [email protected]