TaylorMade P7MB Irons Specifications
Full factory loft, lie and length chart for the TaylorMade P7MB irons, 2020–present.
- Years produced
- 2020–present
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- 1025 carbon steel
- Set makeup
- 3–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 21 | 60.5 | 39 | 0.075 | 0 | D3 |
| 4 | 24 | 61 | 38.5 | 0.071 | 0.5 | D3 |
| 5 | 27 | 61.5 | 38 | 0.069 | 1 | D3 |
| 6 | 31 | 62 | 37.5 | 0.067 | 1.5 | D3 |
| 7 | 35 | 62.5 | 37 | 0.063 | 2.6 | D3 |
| 8 | 39 | 63 | 36.5 | 0.061 | 5 | D3 |
| 9 | 43 | 63.5 | 36 | 0.059 | 6.1 | D3 |
| PW | 47 | 64 | 35.75 | 0.055 | 6.6 | D4 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade P7MB
The P7MB is TaylorMade's muscleback blade, forged from 1025 carbon steel using a compact grain forging process and finished with milled faces and grooves. It carries the least offset of any club in the P-Series, from 1.9mm in the 3-iron down to 1.4mm in the pitching wedge, with a thin topline and a narrow sole. The 7-iron is 35 degrees and the pitching wedge 47 degrees, one degree weaker than the P7MC cavity back through the 9-iron, and the set is offered 3-iron through pitching wedge with no stock gap wedge. Specs below are the men's standard right-handed steel build.
Stock shafts
- KBS Tour — steel
Related models
Frequently asked questions
What is the loft of a TaylorMade P7MB 7-iron?
The TaylorMade P7MB 7-iron has a loft of 35 degrees, with a 62.5-degree lie and a 37.00-inch steel-shaft length.
Is the P7MB a true blade?
Yes. The P7MB is a one-piece 1025 carbon steel muscleback with no cavity, no tungsten weighting and the smallest offset in the P-Series, ranging from 1.9mm in the 3-iron to 1.4mm in the pitching wedge.
What is the pitching wedge loft on the P7MB?
The P7MB pitching wedge is 47 degrees, the same as the P7MC. The set runs 3-iron through pitching wedge with no stock approach or gap wedge.
Where it sits in the lineup
Introduced in 2020, the TaylorMade P7MB is a current blade set in the TaylorMade range, with no replacement announced. It replaced the P730. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- TaylorMade's own archived P7MB product page (taylormadegolf.com, archived 2020) - full manufacturer loft/lie/offset/length/swing-weight table, identical across the Aug 2020, Jan 2021 and Jun 2021 captures. Independently confirms every loft, lie, length, offset and swing weight recorded here.
- Note: several widely-cited retailer tables (2nd Swing, Miles of Golf, WWGolf, Fairway Jockey) pair the P7MC loft column with the P7MB offset column, which makes them look mutually corroborating when they share a common upstream error. TaylorMade's own page gives the 21/24/27/31/35/39/43/47 lofts used here.
- Note: bounce is the one column no first-party TaylorMade source publishes for this model. The values recorded here are uncontradicted but unsourced.
- TaylorMade 2021 Custom Options & Specifications catalogue (updated 03/02/21), 2021 Irons pages - P7MB loft/lie/offset/bounce/length/swing-weight table, cross-identified by the P-Series Combo Guide stock-loft chart (MB column: 21, 24, 27, 31, 35, 39, 43, 47 degrees)
- 2ndswing.com TaylorMade P7MB Iron Set page (corroborates lie, length and the 1.9mm to 1.4mm offset progression; note that its loft column reproduces the P7MC values, so lofts here follow the TaylorMade catalogue)
Last reviewed 2026-09-05. Spot an error? info@loftchart.com