TaylorMade rac OS Irons Specifications

Full factory loft, lie and length chart for the TaylorMade rac OS irons, 2003–2005.

Years produced
2003–2005
Category
Game Improvement Irons
Construction
investment cast
Material
stainless steel with a tungsten Tuned Performance Cartridge
Set makeup
2–LW

Loft, lie & length chart

Standard men's steel-shaft specifications for the TaylorMade rac OS irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
21860.539.250.287D1
3206138.750.276D1
42361.538.250.264D1
5266237.750.248D1
62962.537.250.236D1
7336336.750.224D1
83763.536.250.209D1
9416435.750.197D1
PW4564.535.50.185D2
AW5064.535.50.185D2
SW5564.535.250.079D4
LW6065350.079D4

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop TaylorMade rac OS

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

TaylorMade rac OS loft by clubColumn chart of loft in degrees for each club in the set: 2 18, 3 20, 4 23, 5 26, 6 29, 7 33, 8 37, 9 41, PW 45, AW 50, SW 55, LW 60.0°10°20°30°40°50°60°2: 18°182+23: 20°203+34: 23°234+35: 26°265+36: 29°296+47: 33°337+48: 37°378+49: 41°419+4PW: 45°45PW+5AW: 50°50AW+5SW: 55°55SW+5LW: 60°60LWClubGapLoft
Loft for each club, 2 to LW. The Gap row is the loft added from one club to the next; gaps run from 2° to 5°.
TaylorMade rac OS 7-iron loft angleSide view of the club face tilted 33 degrees back from vertical, the loft of the 7-iron.33°VerticalFaceTarget
The 7-iron face, drawn at its 33° loft from the chart. Head shape is schematic, not to scale.

About the TaylorMade rac OS

The rac OS was the oversize, most forgiving member of TaylorMade's rac iron family. The rac name stands for relative amplitude coefficient, a vibration-management approach that routes impact energy into shaped Feel Pockets in the back of the head. A repositioned Tuned Performance Cartridge saves 32 grams that is moved to the perimeter, and the head pairs an ultra-thin face and deep cavity with generous offset. The 7-iron is 33 degrees and the stock range runs from a 2-iron to a 60-degree lob wedge. Specs below are the men's standard steel-shaft build.

Stock shafts

Related models

Frequently asked questions

What is the loft of a TaylorMade rac OS 7-iron?

The TaylorMade rac OS 7-iron has a loft of 33 degrees, with a 63-degree lie and a 36.75-inch steel-shaft length.

What does rac stand for on TaylorMade irons?

rac stands for relative amplitude coefficient. It is TaylorMade's method of managing impact vibration by directing energy into shaped Feel Pockets in the back of the clubhead rather than letting it spread in all directions.

What is the pitching wedge loft on the rac OS?

The rac OS pitching wedge is 45 degrees, with a 50-degree approach wedge, 55-degree sand wedge and 60-degree lob wedge available in the set.

Finding a used set

The TaylorMade rac OS ran from 2003 to 2005 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • TaylorMade official rac OS Irons sell sheet, RAC OS SPECIFICATIONS table (loft, lie, offset in mm, steel length, steel swingweight, grip), taylormadegolf.com/docs/productspecs/04_racOS.pdf
  • Same sell sheet, feature table and shaft footnote (T-Step Ultralite 90-gram steel shaft, 32-gram Tuned Performance Cartridge, rac Feel Pockets)
  • golfclubspec.com rac OS entry (corroborating loft, lie and offset values)

Last updated 22 July 2026. Spot an error? info@loftchart.com